Cayer AF2451 Professional Video Camera Tripod 67 inches with Fluid Drag Head, 4-Section Compact Aluminimum Tripod Convertible to Monopod for DSLR Camera, Video Camcorder






Cayer AF2451 Tripod with H4 Fluid Head

This Cayer AF2451 Video Tripod Kit combines 4-section aluminum tripod legs and the H4 fluid head, a removable flat base head. The video tripod system has a height range of 24.2" to 67.4" with the center column extended and features a reverse folding leg design for a storage length of only 25.6". The center column features a built-in leveling base, enabling you to quickly level the head without adjusting the tripod legs. For increased versatility, the center column can be used at full height or shortened for low-to-the-ground shots; one of the tripod legs is removable and can be combined with the center column to turn the system into a monopod when needed. Supporting loads up to 13.2 pounds, the H4 video head offers separate pan and tilt controls for smooth and precise camera movements.



AF2451 with H4 Head Tripod Kit Specs

Load Capacity: 13.2 lb / 6 kg

Leg Sections: 4

Max. Dia of Tube: 1.14" / 29mm

Min. Dia of Tube: 0.73" / 18.5mm

Max. Working Height: 67.4" / 171cm

Min. Working Height: 24.2" / 61.5cm

Folded Length: 25.6" / 65cm

Reverse-Folding Legs: Reversable 180°

Leg Lock Type: Flip Lock

Weight: 6.5 lb / 2.95 kg



  • Offers 360° panning, tilt angle adjustments from +90° to -70°
  • Provides fixed fluid drag in both the pan and tilt axes
  • An integrated bubble level on the head aids you in quickly leveling the fluid head
  • The Easy Link connector is a 3/8"-16 threaded hole in the side of the head that allows you to easily mount accessories to the fluid head itself


Leveling Center Column

A leveling base is attached to the top of the center column, could be tilted 15° in any direction and allow you to quickly level the head independently of the tripod.


Three Position Leg Angle Stops

Independent leg positioning at 3 different angles (25°, 55°, and 80°) for more versatility and possibilities to adapt to uneven terrain.


Spiked or Rubber Feet

The tripod leg has a 3/8" thread at the lower end and is equipped with interchangeable screw-in rubber and stainless steel spiked feet depending on your needs.