Stuart Turner Monsoon Universal U4.0 Twin head 4.0 BAR Shower Pump 46411
Stuart Turner Monsoon Universal U4.0 Twin head 4.0 BAR Shower Pump 46411
Monsoon Universal 4.0 bar twin pump is designed for installation into vented systems to pump both the hot and cold water supplies - boosting both equally.
They can be used to:
- Boost hot and cold water services to the complete home, bathroom, kitchen or cloakroom.
- Applications - Shower, bath or basin mixer, steam cabinet, standard bath-shower/shower, multi-function shower with body jets, bathroom only, apartments, whole house - up to 3 bathrooms
- Pressurise the supply in applications such as loft conversions, where outlets are higher than the water source.
- Pressurise the complete system where it is uncertain whether a positive flow naturally exits.
Stuart Turner Monsoon Shower Pumps
- Extremely system friendly
- Robust brass bodied construction
- Fully WRAS approved and CE compliant
- Quiet operation and smooth system performance
- Long life with built-in engineering excellence
- Designed to be used for long periods of time
- Built-in safety low voltage controls
- All pumps are supplied with 22 mm push-in x 300 mm anti-vibration flexible hoses.
- All flexible hoses feature integral isolating valves.
- All pumps supplied pre-wired with 1.5 metre cable, anti-vibration feet.
- All pumps have G¾ threaded connections.
- Reassurance of up to a 5-year guarantee (subject to conditions)
Technical Specification
The Pump
- Hot & cold inlet strainers
- Stuart hard face mechanical seal
- Flow switch sensitivity: approx. 0.6 l/min
- Pressure switch
- Max.inlet head: 12 metres
- Plumbing connection: G ¾ " male
- Flexible hose: G ¾ " female x 22 mm push-in c/w isolating valves x 305 mm long
- Anti vibration feet
The Motor
- Power Supply: 230/1/50
- Enclosure rating: IPX4
- Motor: Induction type, permanent capacitor, auto resetting protective thermotrip
- Power consumption: 875 Watts
- Full load: 3.9 Amps
- Fuse rating: 13 Amps
- Pre wired
- Rating: Continuous (S1) @ 9 l/min and above
- Gross weight (packed): 12.5 Kg
Payment
Shipping
Returns
Any damaged parcels should not be signed for or must be marked as "unchecked" upon signing for and must be reported back to us within 24h of delivery.
Any product you return must be in the same condition you received it and in the original packaging. Please dont use any tape etc on original packaging and use additional outer packaging for returns.
Stuart Turner Monsoon Universal U4.0 Twin head 4.0 BAR Shower Pump 46411
Stuart Turner Monsoon Universal U4.0 Twin head 4.0 BAR Shower Pump 46411
Monsoon Universal 4.0 bar twin pump is designed for installation into vented systems to pump both the hot and cold water supplies - boosting both equally.
They can be used to:
- Boost hot and cold water services to the complete home, bathroom, kitchen or cloakroom.
- Applications - Shower, bath or basin mixer, steam cabinet, standard bath-shower/shower, multi-function shower with body jets, bathroom only, apartments, whole house - up to 3 bathrooms
- Pressurise the supply in applications such as loft conversions, where outlets are higher than the water source.
- Pressurise the complete system where it is uncertain whether a positive flow naturally exits.
Stuart Turner Monsoon Shower Pumps
- Extremely system friendly
- Robust brass bodied construction
- Fully WRAS approved and CE compliant
- Quiet operation and smooth system performance
- Long life with built-in engineering excellence
- Designed to be used for long periods of time
- Built-in safety low voltage controls
- All pumps are supplied with 22 mm push-in x 300 mm anti-vibration flexible hoses.
- All flexible hoses feature integral isolating valves.
- All pumps supplied pre-wired with 1.5 metre cable, anti-vibration feet.
- All pumps have G¾ threaded connections.
- Reassurance of up to a 5-year guarantee (subject to conditions)
Technical Specification
The Pump
- Hot & cold inlet strainers
- Stuart hard face mechanical seal
- Flow switch sensitivity: approx. 0.6 l/min
- Pressure switch
- Max.inlet head: 12 metres
- Plumbing connection: G ¾ " male
- Flexible hose: G ¾ " female x 22 mm push-in c/w isolating valves x 305 mm long
- Anti vibration feet
The Motor
- Power Supply: 230/1/50
- Enclosure rating: IPX4
- Motor: Induction type, permanent capacitor, auto resetting protective thermotrip
- Power consumption: 875 Watts
- Full load: 3.9 Amps
- Fuse rating: 13 Amps
- Pre wired
- Rating: Continuous (S1) @ 9 l/min and above
- Gross weight (packed): 12.5 Kg
Payment
Shipping
Returns
Any damaged parcels should not be signed for or must be marked as "unchecked" upon signing for and must be reported back to us within 24h of delivery.
Any product you return must be in the same condition you received it and in the original packaging. Please dont use any tape etc on original packaging and use additional outer packaging for returns.