Description

Are you still dismantling the gears with bare hands? It's easy to hurt your hands. Our hydraulic gear puller set will be your ideal disassembly tool. The combination of high-quality material and exquisite craftsmanship makes it sturdy and durable. It is easy to operate and not limited by the venue. The rubber handle provides you with a comfortable feeling of use. The equipped carrying case allows you to easily carry this product to the workplace.

Key Features

Sturdy and Durable: Made of alloy steel with a forging process, this product is corrosion-resistant, wear-resistant, and durable, ensuring your long-term use.

Wide Application: 3 jaws or 2 jaws can be easily interchanged, and they can be used vertically and horizontally without being limited by the venue, suitable for different scenarios.

Thoughtful Design: The thickened elastic top pin allows you to accurately locate the center. The pump body formed in one go is smooth and seamless, so you don't have to worry about breakage or oil leakage. The long handle with anti-slip rubber provides you with a comfortable grip and is not tiring after long-term use.

Easy to Use: You just need to insert the handle into the top of the pump body and move the handle up and down to start working, which is easy. The pump head is very flexible and can rotate 360°.                   

Easy to Clean: It has a smooth surface and a simple structure, so you only need to wipe the dust with a towel after use.

Protective Packaging: The bubble bag provides comprehensive protection for products to ensure that it is fully delivered to you to the greatest extent possible.

Ideal Gift: This practical product will be a wonderful surprise for your family or friends who do vehicle repair work, bringing them more convenience.

Buy with Confidence: We are honored that you have chosen our product. We have sufficient confidence in the quality of the product so that you can buy it confidently. But if you have any questions, you can contact our customer service, he will patiently answer and solve your problems.

Details

Oil Return Switch: When applying pressure, tighten it in the ON direction, and when releasing pressure, tighten it in the OFF direction.

Carrying Case: It allows you to store this product and easily carry it to the place you need.

Application

It is suitable for factories, repair sites, railways, vehicles, etc. It is used to disassemble truck wheels, sprockets, wheel bearings, pulleys, shaft sleeves, rotors, car axles, gears, etc.

Specifications   

Style: Modern    

Color: Light Blue

Material: Alloy Steel, Rubber

Process: Forging

Assembly Required: Yes

Model: YL-20

Max. Stroke: 60mm/2.36in

Max. Reach: 195mm/7.68in

Max. Spread: 350mm/13.78in

Product Size(L*H): 50*51cm/19.69*20.08in                               

Handle Length: 41cm/16.14in    

Package Size: 56*28*11cm/22.05*11.02*4.33in

Rated Output: 20T/44092.45lbs

Gross Weight: 16.5kg/36.38lbs

Package Included          

1* Pump Body               

1* Handle                       

3* Jaws                      

1* Pull Ring                

6* Screws             

6* Pulling Tabs

1* Carrying Case              

1* English Manual

Notes       

• Please read the English manual carefully before use.
• Please note that the rated output data is calculated using a calculation formula based on the size data of the length and diameter of the oil cylinder, so the rated output may have deviations and is only for reference.
• The effective distance of the piston starting rod of the hydraulic puller is only 1.97 inches, so the extension distance should not be greater than 1.97 inches during use.
• If you want to retract the piston activation rod, you only need to slightly loosen the oil return valve rod in a counterclockwise direction, and the piston activation rod will gradually retract.
• Before use, the hydraulic puller of the corresponding tonnage should be selected according to the outer diameter of the object to be pulled, saw, and load force, and avoid damage caused by overloading.
• The hydraulic puller uses (GB443-84) N15 mechanical oil (not included) at 23-113°F and (GB442-64) synthetic spindle oil (not included) at -4-41°F.
• As the new or long-term used hydraulic puller has more air in the cylinder, please move the handle first without loading 2-3 times to eliminate air.
• Please note that the area with the blue outer cover is not an oil cylinder, but rather an oil storage rubber bag inside. The painted cover is for protection! The square tooth trapezoidal thread is the true part of the oil cylinder.

Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before you order.