ASUS Z9PE-D8 WS Dual-Socket Workstation Motherboard Dual LGA 2011 / Intel C602 / SSI EEB / Ex-3XS Workstation — Tested Working
Up for sale is an ASUS Z9PE-D8 WS — ASUS's flagship dual-socket LGA 2011 workstation board and one of the most capable dual-Xeon platforms ever made for the prosumer/workstation market. This unit was originally supplied by 3XS Systems (Scan Computers' award-winning UK custom-build division) as the heart of a high-performance dual-CPU rendering workstation. It has been carefully decommissioned and is sold tested working and ready for a new build.
Why the Z9PE-D8 WS is the ideal budget dual-Xeon platform in 2026:
Ideal for:
⚠️ IMPORTANT — Please read before purchase
1. CMOS battery WILL need replacing
The onboard CR2032 CMOS battery was replaced approximately two years ago, but the board has been sitting unused since then and the battery has almost certainly depleted in storage. You will need to fit a fresh CR2032 before first boot. This is standard expected maintenance for a stored board of this generation and is explicitly disclosed here — it is not a fault and is not a valid reason for return.
What to do on receipt:
Without a fresh battery, the board may show CMOS errors on first POST, fail to retain settings, refuse to boot until BIOS is entered, or display incorrect time/date. None of these symptoms indicate a faulty board — they all resolve immediately with a fresh £2 battery.
2. Form factor — SSI EEB (305 × 330 mm)
This board is larger than standard ATX. It will not fit in many "ATX" or even some "E-ATX" rated cases. Before bidding, confirm your case explicitly supports SSI EEB or has documented clearance for 305 × 330 mm boards with the additional mounting holes. Compatible cases include the Fractal Design Define 7 XL, Phanteks Enthoo Pro / Pro 2, Lian Li PC-D8000 / O11D XL, Corsair 1000D, and most Supermicro / server chassis. The Fractal Design Define XL R2 is borderline — physical fit is possible but mounting hole alignment is tight; check carefully before committing.
3. LGA 2011 sockets — both confirmed good
Both LGA 2011 sockets have been individually inspected under direct light. All pins on both sockets are confirmed straight, uniform, and undamaged. Socket protective covers are in place for shipping. The board is ready to accept compatible CPUs out of the box.
4. Power supply requirements
The Z9PE-D8 WS requires an ATX PSU with dual EPS 8-pin CPU connectors (one per CPU socket) — most quality 750W+ PSUs have these. A 24-pin ATX connector alone is not sufficient to run both CPUs. PSU not included with this listing.
5. FireWire is via internal header, not native rear port
The board has two IEEE 1394a (FireWire 400) channels via an internal header, not on the rear panel. Retail boxes originally included a USB2.0+1394 expansion bracket that exposed FireWire at the rear of the case — this bracket is not included with this listing. If you need rear-panel FireWire access, a compatible bracket can be sourced separately for £5–10 on eBay.
6. CPU coolers — Square ILM only
LGA 2011 narrow-ILM Xeon coolers (typically used in 1U/2U server chassis) are not compatible with this board. You need standard LGA 2011 (Square ILM) coolers — Noctua NH-U12DX i4, NH-U14S DX-2011, and similar tower coolers are popular choices.
7. No CPU, no RAM, no PSU, no cooler — board only
This is a bare-board sale. You will need to source compatible Xeon CPUs, ECC/RDIMM (or standard DDR3) memory, and CPU coolers separately.
Condition
Good used working condition. The board has lived in a professional studio environment as part of a high-performance workstation build — no overclocking, no extreme thermal cycling, run within spec throughout its working life. Some minor dust and light cosmetic marks consistent with normal installed use; the board itself is electrically sound and was tested working before decommissioning. Photos show the actual unit you'll receive.
What's included:
Not included:
Postage & collection:
Returns:
30-day returns accepted if the board fails to function as described. Please note: a depleted CMOS battery and SSI EEB form factor incompatibility with the buyer's case are both fully disclosed in this listing and are not valid reasons for "not as described" returns. Buyer pays return postage on any return.
Any questions, please ask - happy to clarify compatibility, supported CPUs, ECC memory selection, or anything else before you bid.
3/6