38mm Adjustable Threshold Strip

Step by Step Easy Fitting Instructions 3 Clip System

Step 1. Cut top of base to length & stick base to a clean dust free floor.
Step 2 .Select the size of clips required, then tap or press the clips into the base spaced equally apart, most professionals would tap in to place using a block and hammer, taking care not to damage the clips.
Step 3. Press the top onto the clips at the desired angle to complete the installation, If you are unsure about the size of the clip the start with smallest & work upwards until satisfactory fit is achieved, you do not need to remove the smaller clips if larger ones are required.

Step by Step Easy Fitting Instructions Single Clip System supplied with some colours.

Step 1. Cut top of base to length & stick base to a clean dust free floor.
Step 2. First try fitting the threshold without the clips, pressing the threshold straight onto the base, (this will mimic the white clips).
Second if this is not possible add clips to each of the four grooves which will raise the fitting strip (this will mimic blue clips).
Step 3. Place the clips in to the higher level of the threshold base, (this will mimic the red clips)
Step 4. press the top onto the clips at the desired angle to complete the installation.

Hot Tip ! If for any reason you struggle to put the clips in, angle the clip and use a coin.

Orders under 1.2m are shipped using Yodel 2?5 day delivery.

Longer parcels are sent using DHL or DPD Express services.

Estimated delivery dates are shown during checkout.

30 day returns accepted on unused items in original packaging.

Please report any delivery damage within 7 days with photos of packaging and product.

Syntech Plastics are one of the UK's leading manufacturers of flooring thresholds and edge trims.

We manufacture premium British-made products in a wide range of colours and sizes.

Colours may appear differently depending on screen settings and device type.

We recommend ordering a sample for accurate colour matching.