Silicone rubber liquid for mould making *OLDER stock SUPER SPECIAL - Be Quick!

SUPER SPECIAL - New silicone arriving - clearance on all old stock was $32.50kg now as low as $12.40kg (12kg box) - Be Quick! Condensation type Liquid Silicone Rubber & Catalyst We now have a new catalyst - blend at a 2-3%. It is setting very quickly, 5-10minutes pot life - sets in 1-24hours, blend smaller qtys to use effectively. 1kg Container with jar of Liquid catalyst *IF POSTAGE IS A BIT HIGH on the 12kgs and 48kgs, just get message us to check as we can use couriers at a much lower rate than Aust Post to some locations *Please note, due to the catalyst this product cannot be sent express post, please select the regular post option. COLOUR: If you would like it coloured like the images we can include a small package of mica in almost any colour which you can mix with your Catalyst before you blend with the silicone If you would like the colorant added in with your order please make sure you leave a note at checkout to state this and also which colour you would like If we do not receive this note at checkout from you we will send white silicone and clear catalyst TYPE: 08 is slightly firmer, use this for moulds where you need a little more strength in the sides (less flexible, can be more difficult to unmould long or detailed masters) 05 is slightly more flexible, use this for moulds where you need a little more flexibility in the details (more flexible, can be less sturdy on larger moulds) 200ml is a blend of both silicones providing a good in between type to get started We use this silicone regularly in our mould making It is brand new, fresh, perfect quality It will come in a container of silicone with a small bottle of catalyst and instructions are found below in this listing Condensation type Silicone and Rubber Benefits: Two-part silicone rubber: You will receive the liquid silicone plus a bottle of Catalyst - you need catalyst to cure it! No heat required - sets at room temperature Can withstand high temperatures once completed Perfect precision - shows even tiny details Can be used for making many different moulds/molds including: Soaps, Candles, Concrete / Cement, Art pieces, Plaster, Resin, etc. Details: Colour: Silicone - White / Catalyst = Clear (can be coloured with our Micas) Hardness: Shore A Hardness - Approx. 10 Tensile strength - Approx. 4.0MPa- MPa Tear strength > 23kN/m - 24 kN/m Linear shrinkage 3% slow speed catalyst - PLEASE NOTE: Increasing the catalyst used may increase the shrinkage. This will only be noticeable in very large moulds Best working temperature: approximately 20 degrees, the hotter it is the quicker it will cure Always test a small amount firstly To avoid air bubbles, use less catalyst, the slower setting time will allow them to rise more easily INSTRUCTIONS FOR MOULD MAKING: Print out a copy of the instructions for free here Prepare your master (any medium except silicone) Create a wall around the master, eg a cardboard wall or lego brick wall, attach the master to the base (so it won’t float in the silicone) you can use a hot glue gun. Make sure there’s no gaps. Open the silicone rubber container and stir extremely well if you find that there are any lumps in the base of the container blend until the lumps become smooth again if you cannot smooth out all the lumps just throw those small pieces away before use. Make sure you have this blended well before you add the catalyst as once you add the catalyst you only have a very short work time (To begin use only a small amount, say 100gms and begin at 2-4% catalyst.) To colour, you can mix some mica with your catalyst (Make sure it is Renascent Bath & Body Mica as we not sure how others may react) Mix the mica into the catalyst. Once it is stirred up and ready to use add the catalyst at 3% (the colour will assist you to see if the silicone and catalyst are mixed properly). Add the catalyst and mix well so it is fully blended, if you get pockets not blended it won't set, if this happens, leave it for 3-7 days, it may blend through, but best to mix well. Have your master ready to go with the surrounds made and then pour the silicone rubber in a thin stream - over the top of your master, allowing the silicone to flow up from underneath, thus filling any crevices or marks and preventing air bubbles. Fill to completely cover the master Take a skewer or metal fork and gently stir, poking down the side to ensure any trapped air bubbles are released and pop up to the surface where you can pop them with your skewer. You have about a 5-10 minute work time before it goes sticky and 4-24 hours complete cure time - allow to set for 5 to 24 hours Once fully set, peel off your surrounds and pop your master out of your completed silicone mould Give it a wash with warm soapy water, you now have a mould ready to use many times As we are professional mould makers and make hundreds of different moulds we are here to assist you if you have any questions or concerns. It is fine for impression mats although don't pour silicone on silicone as they will firmly stick together. If over a plastic or lace cloth should be fine. This information is copyright © Renascent Bath & Body / Lesley MitchellIndividuals must test a small amount first to determine suitability for their purpose*Wear gloves and eye contact and do not allow the catalyst to come in contact with skin or eyes, if this occurs, flush immediately with water and if in contact with the eyes, seek medical attention.

Silicone rubber liquid for mould making *OLDER stock SUPER SPECIAL - Be Quick!

SUPER SPECIAL - New silicone arriving - clearance on all old stock was $32.50kg now as low as $12.40kg (12kg box) - Be Quick!

Condensation type Liquid Silicone Rubber & Catalyst

We now have a new catalyst - blend at a 2-3%.

It is setting very quickly, 5-10minutes pot life - sets in 1-24hours, blend smaller qtys to use effectively.

1kg Container with jar of Liquid catalyst

*IF POSTAGE IS A BIT HIGH on the 12kgs and 48kgs, just get message us to check as we can use couriers at a much lower rate than Aust Post to some locations

*Please note, due to the catalyst this product cannot be sent express post, please select the regular post option.

COLOUR:

If you would like it coloured like the images we can include a small package of mica in almost any colour which you can mix with your Catalyst before you blend with the silicone
If you would like the colorant added in with your order please make sure you leave a note at checkout to state this and also which colour you would like
If we do not receive this note at checkout from you we will send white silicone and clear catalyst

TYPE:

08 is slightly firmer, use this for moulds where you need a little more strength in the sides (less flexible, can be more difficult to unmould long or detailed masters)
05 is slightly more flexible, use this for moulds where you need a little more flexibility in the details (more flexible, can be less sturdy on larger moulds)
200ml is a blend of both silicones providing a good in between type to get started

We use this silicone regularly in our mould making
It is brand new, fresh, perfect quality

It will come in a container of silicone with a small bottle of catalyst and instructions are found below in this listing

Condensation type Silicone and Rubber

Benefits:

Two-part silicone rubber: You will receive the liquid silicone plus a bottle of Catalyst - you need catalyst to cure it!
No heat required - sets at room temperature
Can withstand high temperatures once completed
Perfect precision - shows even tiny details
Can be uséd for making many different moulds/molds including: Soaps, Candles, Concrete / Cement, Art pieces, Plaster, Resin, etc.

Details:

Colour: Silicone - White / Catalyst = Clear (can be coloured with our Micas)
Hardness: Shore A Hardness - Approx. 10
Tensile strength - Approx. 4.0MPa- MPa
Tear strength > 23kN/m - 24 kN/m
Linear shrinkage 3% slow speed catalyst -
PLEASE NOTE: Increasing the catalyst uséd may increase the shrinkage. This will only be noticeable in very large moulds
Best working temperature: approximately 20 degrees, the hotter it is the quicker it will cure
Always test a small amount firstly
To avoid air bubbles, use less catalyst, the slower setting time will allow them to rise more easily

INSTRUCTIONS FOR MOULD MAKING:

Print out a copy of the instructions for free here

Prepare your master (any medium except silicone)

Create a wall around the master, eg a cardboard wall or lego brick wall, attach the master to the base (so it won’t float in the silicone) you can use a hot glue gun. Make sure there’s no gaps.

Open the silicone rubber container and stir extremely well
if you find that there are any lumps in the base of the container blend until the lumps become smooth again if you cannot smooth out all the lumps just throw those small pieces away before use.

Make sure you have this blended well before you add the catalyst as once you add the catalyst you only have a very short work time

(To begin use only a small amount, say 100gms and begin at 2-4% catalyst.)

To colour, you can mix some mica with your catalyst (Make sure it is Renascent Bath & Body Mica as we not sure how others may react)

Mix the mica into the catalyst. Once it is stirred up and ready to use add the catalyst at 3% (the colour will assist you to see if the silicone and catalyst are mixed properly).

Add the catalyst and mix well so it is fully blended, if you get pockets not blended it won't set, if this happens, leave it for 3-7 days, it may blend through, but best to mix well.

Have your master ready to go with the surrounds made and then pour the silicone rubber in a thin stream - over the top of your master, allowing the silicone to flow up from underneath, thus filling any crevices or marks and preventing air bubbles.

Fill to completely cover the master

Take a skewer or metal fork and gently stir, poking down the side to ensure any trapped air bubbles are released and pop up to the surface where you can pop them with your skewer.

You have about a 5-10 minute work time before it goes sticky and 4-24 hours complete cure time - allow to set for 5 to 24 hours

Once fully set, peel off your surrounds and pop your master out of your completed silicone mould

Give it a wash with warm soapy water, you now have a mould ready to use many times

As we are professional mould makers and make hundreds of different moulds we are here to assist you if you have any questions or concerns.

It is fine for impression mats although don't pour silicone on silicone as they will firmly stick together. If over a plastic or lace cloth should be fine.

This information is copyright © Renascent Bath & Body / Lesley Mitchell
Individuals must test a small amount first to determine suitability for their purpose*Wear gloves and eye contact and do not allow the catalyst to come in contact with skin or eyes, if this occurs, flush immediately with water and if in contact with the eyes, seek medical attention.

Shipping info

Click the Shipping & Payments tab above the listing description for more info

Click the Shipping & Payments tab above the listing description for more info!

Additional delivery notes

PICK UP OPTION

Our items are available for pick-up. Pick up procedure is as follows:

Purchase the item through eBay
Email us to coordinate pickup

PAYMENT

We are happy to combine shipping, by selecting "Buy It Now" and then requesting an invoice prior to paying (You may need to be on a PC and adding to cart may disable this feature (remove items from cart and select "buy it now" on a PC).

We accept payment via All Major Credit Cards (Visa, Mastercard, AMEX, Discover), Google Pay, PayPal, & Apple Pay (on mobile & eBay App).

Thank you for shopping with us on eBay!

Additional Information

No additional information at this time

Ask seller a question

Shipping & Payments

Click the Shipping & Payments tab above the listing description for more info

Payment

Accepted Payment Methods

Immediate payment is required upon selecting "Buy It Now" or upon checking out through the cart.

We accept payment via All Major Credit Cards (Visa, Mastercard, AMEX, Discover), Google Pay, PayPal, & Apple Pay (on mobile & eBay App).

Thank you for shopping with us on eBay!

Returns

Returns are accepted

Items must be returned within 30 days of the auction ending

Buyer will pay for return shipping.

Silicone rubber liquid for mould making *OLDER stock SUPER SPECIAL - Be Quick!