This RFID card reader needs to work with Wiegand 26/ 34 protocol door access controller, such as control board, fingerprint device or standalone system, it can't work alone.
Note:
-
This is a Reader only. It must be connected to a Wiegand-compatible door access control board, fingerprint device, or master controller to operate
-
Exclusively supports 125KHz ID/EM cards and fobs (Does not support IC/Mifare 13.56MHz cards)
-
No manual, please connect wire to controller and set up via controller
Packing List (bulk pack):
Specifications:
-
Protocol: Wiegand 26/ 34
-
Reading speed: <0.2s
-
Reading interval: <0.5s
-
Sensor distance: 5-15cm
-
Support card: ID/ EM
-
Frequency: 125KHz
-
Working voltage: DC5-16V
-
Working current: 70mA
-
Working temperature: -25 to 75 degree C
-
Humidity: 10-90%
-
LED color: Blue/ Green
-
Speaker: Internal
-
Size: 102 x 43 x 16mm (4.02 x 1.69 x 0.63 inch)
-
Weight: 78g (0.17 lb)