See pictures for an example of what you will receive.

One (1)

O.E.M. Original Equipment Manufacturer Factory

 remote keyless entry fob alarm controller

Transmitter control clicker keyfob controller replacement

IMPORTANT: Before entering programming mode, have in possession 
all of the transmitters you will be using on the vehicle. Once you program 
the transmitter, all previous codes will be erased from the memory. The 
other transmitters will not be functional until you program the
 transmitters again.  

1.   Close and lock all doors with the driver’s side power lock/unlock switch.

2.   Insert key into ignition and remove it from the ignition key cylinder 
at least six times within 10 seconds. Your Hazard Lamps will flash if you 
have performed this step successfully. NOTE: Withdraw key completely from 
ignition cylinder each time. If this procedure is performed too fast, system will 
not enter programming mode.

3.   Insert key into the ignition cylinder and turn to the ACC position.

4.   Within 5 seconds, push ANY button on the remote transmitter. Your
 Hazard Lamps should flash. NOTE: Do not press the button more than one
 time in the above step. If the button is pressed more than one time, the
 programming procedure will not be successful.

5.   If there are any remaining transmitters (including the old ones), unlock
 then lock all doors using the driver’s side power lock/unlock switch and
 within 5 seconds, push ANY button on the next remote. Your Hazard Lamps 
should flash. Repeat this step for each transmitter (including any existing 
transmitters).

6.   Turn the key to the OFF position, remove keys from the ignition, unlock 
doors using the driver’s side power lock/unlock switch and open the driver 
side door.

How to find out if this remote is compatible with your Vehicles’ installed RKE System

If you're not sure your vehicle can use this remote, please ask questions or contact your local dealer first.

1.   Check the back of your current or old keyless remote to match FCC ID /Part #’s.

2.   Contact your local dealer and tell them your VIN# and ask what part # / FCC ID you need.

Your vehicle will be installed with one of the following keyless entry systems:  

  a. Standard Keyless Remote Packages: Installed at time of manufacture. 

  b. Optional Keyless Remote Packages: Installed by a dealer. 

  c. Aftermarket Keyless Remote Packages: Installed by previous owner or a car/audio shop. 

  d. No remote keyless entry system at all.

The above information can change which remote you need

for your installed remote keyless system.

100% Guarantee Remote Shipping / Return Policy

Warranty/Returns:  

1.     We have a 30 day return policy. 

2.     All returns for replacements and refund need an RMA #.

3.     Please contact us before returning items so we can give you the RMA # and the proper return address.

4.     No refunds / replacements will be granted without an RMA#

5.     All cut keys are subject to a $20 deduction from the refund

We ensure proper working condition of all previously used or new remotes through a serious of tests performed with the Santronics Testing device. Each button is tested for functionality prior to shipment and then logged.

Please Note: Each remote and circuit board is UV ID’d prior to shipment  – All returns receive a UV ID inspection to verify originality of remote sent prior to refund or replacement.

  Does this keyless remote entry come with a battery?  

Yes. It will have a working battery installed.

Battery Condition:

        A. All remotes sold on Keyless4u include working batteries.

        B. Installed batteries are not tested for battery life- they are simply working.

             Some are new and some are used.

fob controller replacement