Product Feature

1. [The heat shrink tube has good sealing]Good electrical insulation, good sealing and corrosion resistance, high temperature resistance.
   In particular, the hose after heat activation is sealed against saline and other liquids.
   When you and your child do DIY by themselves, their performance is better.
2. [The design of the heat gun is perfect:] the non-slip hand-held design is more frictional, and will not deviate from the direction when it is placed and used.
   The heat gun has two cooling vents, which increases the working time, but it is still recommended not to exceed 10 minutes.

Product specification

Heat gun:

• Material: ABS Plastic
• Color: Black
• Length: 22cm
• Power Cable: approx. 100cm
• Working temp: 200 Celsius
• Power: 300W
• Voltage: 110V 50-60HZ
• Weight: 300g
• Plug Type: US Plug

Heat Shrink Tube:

• Color: BLACK+RED+YELLOW+BLUD+GREEN
• Material: Polyolefin
• Heat shrink ratio: 2:1
• Operating Temperature:-131°C to + 257℉
• Shrinkage Temp: 212℉(Fahrenheit)
• Full Shrinkage Temp: 230℉maximum
• Tensile strength: 10.4Mpa
• Dielectric strength: 15 kV / mm
• Flammability: Flame Retardant

328Pcs Heat Shrink Tube Shrinkage - It is 2:1 heat shrink ratio, and will shrink up to 1/2 of original, just use the mini heat gun heating for it 5 second.
High-quality heat gun: The hot air gun has two heat dissipation ports, and the service life can reach more than 5 years. 300W power is suitable for many DIY productions and can dissolve hot melt glue sticks and glue. Of course, it is definitely suitable for heat shrinkable tube.
Eight sizes high-quality heat shrink tubing for your choose, they can be used for solder joint protection, group of lines marking, resistance electric capacity reason protection etc. First turn on this mini hot air gun switch,then glue inside will soften and seal the connection.
[Product parameters] Heat gun ：The length is 22 cm, which can produce high temperature of 200 degrees Celsius, and the US plug. Heat-shrink Tubing: 8 sizes, 5 colors, the sizes are 1mm, 2mm, 3mm, 4mm, 6mm, 8mm, 10mm, 14mm.
[Product warranty:] The heat gun can be used for five years. If it is broken under normal use, it will be replaced for free within five years. The heat shrinkable tube is RoHS compliant and free of formaldehyde. VETIN only produces safety products.