Beitian BN-180 GPS Receiver Module M8030 Passive Antenna Support GPS Glonass Beidou Navigation for APM Flight Controller

Description
Dimension:18mm*18mm*6mm
Weight: 4.9g
Connector: 1.00mm spacing between the 4pins patch seat
 
Specification
Electrical Characteristics
Chipset : UBX M8030-KT
Receiving Format : GPS,GLONASS,Galileo,BeiDou,QZSS and SBAS
Frequency : GPS L1,GLONASS L1,BeiDou B1,SBAS L1,Galileo E1
Channels : 72 Searching Channel
 
Sensitivity
Tracking: -167dBm
Reacquisition: -160dBm
Cold start: -148dBm
Hot start: -156dBm
 
Accuracy
Position Horizontal : 2.0 m CEP 2D RMS SBAS Enable (Typical Open Sky)
Velocity : 0.1m/sec 95% (SA off)
Timing : 1us synchronized to GPS time
 
Acquisition Time
Cold Start: 26s
Warm start: 25s
Hot start: 1s
 
Data and Update Rate
Support Rate: 4800bps to 921600bps,Default 9600bps
Data Level: TTL or RS-232,Default TTL level
Data Protocol: NMEA-0183 or UBX, Default NMEA-0183
Single GNSS: 1Hz-18Hz
Concurrent GNSS: 1Hz-10Hz,Default 1Hz
 
Operational Limits
Altitude: 50,000m Max
Velocity: 515m/s Max
Acceleration: Less than 4g
 
Power consumption
VCC: DC Voltage 3.0V-5.5V,Typical: 5.0V
Current: Capture 50mA/5.0V
Operating temp: -40 °C ~ +85°C
Storage Temp: -40°C ~ +105°C
 
Indicator :
TX LED: BLUE.The data output, TX LED flashing
PPS LED: RED. PPS LED not bright when GPS not fixed,flashing when fixed
 
Wiring:
GND,TX output,RX input,VCC(3.0v-5.5v)
 
Package Included
1 x BN-180 GPS Module
3 x 15cm Cable

See more in the flyfuntech2022