FCC ID: EZSDEI476

PART #: 476A

 (Interchangeable) RPNs:

4 BUTTONS

See Item Specifications for more details

COMPATIBLE W/ THE FOLLOWING SYSTEMS:

Avital

2200

4000

4100

4200

4300

4400

21000

Python

440 HP

460 HP

500 HP

660 XP

700 XP

900 XP

1600 XP

1400 XP

1200 XP

450 ESP

1000 ESP

1500 ESP

3000 ESP

Sidewinder

3500 ESP

5000 ESP

6000 ESP

6500 HF

6500 HF

PC 7000 SHF

381S

3200 HS

3300 HS

5500 XS

Valet

450

519H

150 ESP

200 ESP

300 ESP

500 ESP

600 ESP

800 ESP

561R

562T

712T

716T

Hornet

533T

554T

740

742

Rattler

100

200

250

300

110D

210D

310D

369D

Viper

210 HV

350 HV

650 XV

850 XV

Automate

35

52

53

410

425

435

552

553

PROGRAMMING THESE REMOTE(S)

transmitter/receiver learn routine

 The system comes with two transmitters that have been taught to the receiver. Use the following learn routine to add transmitters to the system or to change button assignments if desired.

The Valet®/Program button, plugged into the blue port, is used for programming. There is a basic sequence to remember whenever programming this unit: Door, Key, Choose, Transmit and Release.

1. Open a door. (The GREEN wire, H1/5, or the VIOLET, H1/7 must be connected.)
2. Key. Turn the ignition on. (The H1/9 YELLOW switched ignition input must be connected.)
3. Select the receiver channel. Press and release the Valet®/Program switch the number oftimes necessary to access the desired channel. Once you have selected a channel, press andHOLD the Valet®/Program switch once more. The siren will chirp and the LED will blink thenumber of times corresponding to the channel that has been accessed.

 NOTE:If adding a remote, a button must be taught to Channel One prior to programming other channels

 NOTE:If any transmitter button from a known transmitter is programmed to Channel Five, all transmitters will be erased from memory. This is useful in cases when one of the customer's transmitters is lost or stolen. This will erase any lost or stolen transmitters from the system's memory. It can also be used to start from scratch if the transmitter buttons were programmed incorrectly.

 Press the transmitter button. While HOLDING the Valet®/Program switch, press thetransmitter button that you wish to assign to that channel. The unit will chirp indicatingsuccessful programming. You cannot teach a transmitter button to the system more than once.

 NOTE:For Channel 4, press Button I to program the Auto Learn Standard Configuration on a two button transmitter. If programming an optional four-button transmitter, then press Button I to assign the standard configuration to Buttons I and II; or press Button III to assign the standard configuration to Buttons III and IV, instead.

      5 Release. Once the code is learned, the Valet®/Program button can be released.You can advance from one channel to another by releasing the Valet® /Program button and tapping it to advance channels and then HOLDING it. For example, if you want to program Channel Three after programming Channel One, release the Valet®/Program button. Press it twice and release it to aDvance to Channel Three. Then press it once more and  HOLD it. The siren will chirp three times to confirm it is ready to receive the code from the transmitter. Learn Routine™ will be exited if: Ignition is turned off.

 Door is closed.

 Valet®/Program button is pressed too many times.

 More than 15 seconds elapses between steps.

One long chirp indicates that Learn Routine™ has been exited

 operating settings learn routine

 Many of the operating settings of this unit are programmable. They can be changed whenever necessary through the Operating Settings Learn Routine™. The Valet®/Program push-button switch, plugged into the blue port, is used together with a programmed transmitter to change the settings.

 The Operating Settings Learn Routine™ dictates how the unit operates. It is possible to access and change any of the feature settings using the Valet®/Program switch.

To enter the System Features Learn Routine

1. Open a door. (The GREEN wire, H1/5, or the VIOLET, H1/7 must be connected.)

2. Ignition.  Turn the ignition on, then back off. (The H1/9 YELLOW switched ignition input must be connected.)

2. Choose. Within 10 seconds, press and release the Valet/Program switch the number of times corresponding to the feature number you want to program (see the Features Menu

section of this guide). The LED ON settings listed in the Features Menu table are the factory default settings.

 Once the Valet/Program switch has been pressed and released the number of times corresponding to the feature you wish to program, press it once more and HOLD it. After a second, the LED will flash to indicate which feature you have accessed. For example, groups

of five flashes would indicate access to Feature 5. The siren will also chirp five times.

4.Transmit. While HOLDING the Valet®/Program switch, you can select the desired feature settings using the remote transmitter. As shipped, the unit is configured to the default LED ON settings. Pressing Button I while  HOLDING down the Valet/Program switch will program the feature to the LED ON settings. The siren will chirp once to indicate the one-chirp setting has been selected. Pressing Button II while  HOLDING down the Valet/Program switch will change the setting to the LED OFF setting. The siren will chirp twice indicating

that the LED OFF setting has been selected.

5. Release. Release the Valet®/Program switch