Features:

1. Brand New High Quality Curing Light.

2. Composes of high power LED, qualified fiber rod.

3. Noiseless; No libration; Generate little heat when working.

4. Low consumption of standby power with thirty days' standby time

5. Large capacity Li-battery can be used for a long one with full charging.

6. Plenty of fiber rods with very reasonable price on sale for your replacement.

7. Wireless/Cordless design without no cable connect to the unit which could be used very conveniently．

8. It adopts the principle of ray radiation to solidify the light-sensitive resin by shooting at it in a short time.

9. Many brands' resin materials can be cured by this curing-light with optional working modes and lighting times.

Technical:

1. Light source: blue light

2. Wave length: 420nm-480nm

3. Output intensity: 1100-1600mW/cm2; 5W LED

4. Power supply: rechargeable Lithium battery 3.7V/2000mAh

5. Input adapter: 100V to 240V~50Hz/60Hz (Available for global users.)

6. Safety kind: Ordinary type B．non—continuous service Ip40．Class 2．

7. Working condition: environment temperature: 5℃-40℃; relative humidity:≤80%

8. The fiber rod can be autoclaved up to the tempreture134 °C / 273 °F & pressure 0.2Mpa.

9. Build-in light meter within the base

10. Digital LED screen display, clear operation.

11. BEEP at each 5-seconds to indicate remaining curing time

12. Various Curing Time: seven preset curing time 5/10/15/20/25/30/40 seconds.

13. Three Preset Programs:

a. Fast mode: Full power all the time

b. Soft 1 mode: Generally increasing power in first 5 seconds, then full power till the end.

c. Soft 2 mode: Generally increasing power in first 5 seconds, then half power till the end.

14. Full supply of power can satisfy 10-second curing time for 200 times.

15. When running out of the battery, the unit can be operated directly with the switching power adapter.

Packing List:

Main Unit*1

Light Guide*1

Light Board*1

Charging base*1

100v-240v AC Adapter*1

English Operation Manual*1