USB and Din MIDI Controller custom 1 knobs, detachable 2m USB cable

Box dimensions are 95mm x 60 mm x 25mm

The knob is a  potentiometer and is the version that stop (only turn 270 degrees 7 to 5 o’clock)

When the knob is moved the display shows the output CC value, the CC number MIDI Channel and RANGE of the  knob can be changed by using the display and small button located on the USB side of the box.

There are 5 presets each store the knob cc numbers and range
These Setting are stored and remembered when powered off.
no extra software is needed

The USB Cable is also needed to power the unit when only using the DIN socket and needs to be plugged into a USB port or plug socket (phone charger plug).

Can be used to control Ableton Live and other DAW software that allows MIDI learn/mapping, and also most devices that uses MIDI CCs (please refer to the manual of your device for the CC numbers).

__________________________________________

Quick video demo (copy and paste the link).
youtube.com/watch?v=L2PSQNzfHuA

These videos are of other version controllers but they work in the same way
Controlling software (Renoise) and altering range with Arturia Microfreak (copy andpaste the link).

youtube.com/channel/UCgWSqQln0fNKMmSzE0zLqbA

 video to show how quick and simple it is to change the cc number to control the Korg Volca Keys

youtu.be/HbXW_5Xn4EQ

________________________________________

HOW TO SET THE CC NUMBER

To set the CC# for a knob press and hold the button located on the top of the box, then move the knob to the number of the CC you want it to control.  Let go of the button and the display will show 'CC-' then flash the new CC number.

Tip: If you find it difficult to stop on the exact number, for example you are trying to stop on 10 but it only changes between 9 and 11 go to 30+then back down and you should be able to stop on 10.

DISPLAY THE CC NUMBER A KNOB IS SET TO AND THE PRESET NUMBER

Press the small button TWO times and keep the button held in on the 2nd press and the display will show “dSp” (display) Now move a knob and the display will show the current set cc number
Then release the button to show the preset number

CHANGE ALL KNOB CHANNEL NUMBERS (1-16)

The channel is changed the same way the cc# is changed but you press the small button THREE times and keeping the button held in on the 3rd press and the display will show “CHA” (channel all) now move any knob to the number of the channel you want all the knobs to be set to
Then let go of the small button and the display will show “c” and the new channel number

CHANGING THE PRESET (1-5)

Press the small button FOUR times and keep the button held in on the 4th press and the display will show “PrE” (preset) Now move the knob to the preset number you want it set to
Then let go of the small button and the display will show “PrE” then the preset number

CHANGE THE LOW RANGE OF A FADER (0-127)

Press the small button FIVE times and keep the button held in on the 5th press and the display will show “LO” (low)
Now move the knob/knob you want to change the low range of and move it to the number you want it set to
Then let go of the small button and the display will show “LO” and flash the low range of that knob/knob

CHANGE THE HIGH RANGE OF A KNOB (0 -127)

Press the small button SIX times and keep the button held in on the 6th press and the display will show “HI” (high)
Now move the knob you want to change the high range of and move it to the number you want it set to
Then let go of the small button and the display will show “HI” and flash the high range of that knob