Ford Mustang - 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993

Designed to accept Ford OE center caps. Center cap NOT included.

The finish on the 5.0 Resto 10-Hole wheels may not match the Ford original 10-hole wheels.

Clears rear disk brake conversions.

Will not fit 93 Cobra, SVO, and Saleen due to the increased track width of the rear axle.

Provides Nostalgic Styling

Bright, Radiant Finish

Clears Larger Brakes

 

Clear Coat Finish

Machined Face & Lip

High-Quality Aluminum Construction

Metallic Silver Windows & Outer Groove

(1) 17x9 10-Hole Wheel

Increase wheel clearance for modern brakes without sacrificing the factory Fox Body look with 5.0 Resto's 1979-1993 Mustang rear 17x9 10-Hole wheel! The 10-Hole wheel (also referred to as the phone dial wheel) first made its appearance on the 1985 Mustang GT. 5.0 Resto has taken the iconic wheel and given it a modern makeover by increasing the diameter to 17" while still retaining the wheel's unique design. Increasing the diameter allows you to run larger, more modern brakes as well as provide more tire options! 

5.0 Resto carefully measured every millimeter of this wheel to provide a perfect fit on your Fox Body Mustang. Keeping the "windows" proportionate to the increased diameter of the wheel was the ultimate goal and was achieved through countless tweaking and adjustments. From the backspacing and offset to the width and diameter, the 10-Hole wheel provides your Mustang with nostalgic styling and a period-correct look. Each wheel features a machined finish face and lip, with metallic silver windows and an outer groove. The wheel is then clear-coated to protect this finish for years to come! Weighing in at a light 26.1 lbs for the 17x9 wheel keeps the rotating mass down over heavier wheels. 

Steering rack limiters may be needed to eliminate rubbing issues when turning the front wheel.

1979-86 Mustang (All) - Requires a front-wheel spacer OR upgrading to 1987-1993 5.0 struts, spindles & brakes.

1987-93 Mustang (2.3L) - Requires a front-wheel spacer OR upgrading to 1987-1993 5.0 struts, spindles & brakes.

1979-90 Mustang (All) - Due to smaller front wheel openings, installing wheels or tires wider than the factory may require additional clearance on front fenders such as rolling fenders and modifying splash shield.

1979-1993 Mustang Rear Wheel Clearance Notes

Rear quad shocks may need to be reversed or removed for proper fitment. Please check for clearance issues before driving the car. 

See our Quad Shock Flip Article for more information on this procedure.

Installation of wheels that are wider than the factory wheels on the rear of your Mustang may require inner fender clearance and exhaust modification for proper fitment.