Specification:
Condition:100% Brand New And High Quality
Battey Life:About 5 Years
Operating Frequency:433MHz
Manufacturer Part Number:13598773
Reference Number:13598773, 13516165, 13512347, 13522631
 
Features:
♚Guaranteed to fit and meet the specifications of the parts being replaced
♚Utilizes the latest in design and material technology, ensuring quiet and maintenance-free experience
♚Advanced manufacturing technology ensures durability and optimum operation
♚Providing the same performance, durability, and service life.
♚High-precision air valve to prevent air leakage
♚Safe and Reliable --- It is suitable for monitoring the internal pressure,temperature and other information of the tire,avoiding traffic accidents caused by tire failure,provide you with a better safety in the driving process.


Package Content:
4Pcs Tire Pressure Sensor

Comprehensive Vehicle Coverage:
For Buick Encore GX 2020
FOR Buick LaCrosse(433MHz) 2017-2019
FOR Buick Regal & TourX(433MHz)  2018-2020
FOR Cadillac CT4(433MHz) 2020
FOR Cadillac CT6(433MHz) 2016-2020
FOR Cadillac Escalade(433MHz) 2018
FOR Cadillac XT4(433MHz) 2018-2020
FOR Cadillac XT5(433MHz) 2016-2020
FOR Cadillac XT6(433MHz) 2020
FOR Chevrolet Blazer(433MHz) 2019-2020
FOR Chevrolet Bolt EV(433MHz) 2017-2018
FOR Chevrolet Cruze(NON LIMITED) 2016
FOR Chevrolet Cruze(433MHz) 2017-2019
FOR Chevrolet Malibu(433MHz) 2016-2020
FOR Chevrolet Silverado 1500(433MHz) 2017-2020
FOR Chevrolet Silverado 2500(433MHz) 2017-2020
FOR Chevrolet Silverado 3500(433MHz) 2017-2020
FOR Chevrolet Suburban(433MHz) 2018
FOR Chevrolet Tahoe(433MHz) 2018
FOR Chevrolet Volt(433MHz) 2018
FOR GMC Acadia(433MHz) 2017-2020
FOR GMC Sierra 1500(433MHz) 2017-2020
FOR GMC Sierra 2500(433MHz) 2017-2020
FOR GMC Sierra 3500(433MHz) 2017-2020 
 

Optimized Installation Process:

  1. Deflate the Tire:
    Remove the valve cap and core to fully deflate the tire.

  2. Dismount the Tire:
    Secure the tire onto the tire changer and position the valve at the 1 o’clock position relative to the tire separation head. Use a tire tool to lift the bead over the mounting head and dismount the tire.

  3. Remove the Sensor:
    Using a screwdriver, remove the fastening screw and sensor from the valve stem. Then loosen the nut and completely remove the valve.

  4. Install the Sensor and Valve:
    Insert the valve stem through the valve hole on the rim. Secure the screw-nut with a torque of 4.0 Nm using a positioning pin for alignment. Attach the sensor body against the rim and tighten the mounting screw.

  5. Mount the Tire:
    Position the tire onto the rim, ensuring the valve is oriented 180 degrees opposite the separation head. Carefully seat the tire bead over the rim edge.

On Feb 4, 2026 at 19:13:43 PST, seller added the following information:

Datacaciques