Wireless Bridge for Easy Network Expansion,5.8G Point to Point Extending Wi-Fi to Outbuildings,Outdoor Wi-Fi Network Bridge W/ 1000Mbps RJ45Port and 16dBi Antenna,PoE Powered, IP65 Waterproof, 2-Pack

About this item:

CPE830 Gigabit wireless WiFi bridge is a 5.8G Long Range WiFi Extender Outdoor CPE with a digital tube display. Point-to-point pairing can be done by dialing without having to access the GUI, avoiding the complex setup program, saving much human work and cost, and making the long-range wireless coverage, data transmission, and wireless monitoring simple and professional.

1000Mpbs digital display wireless bridge, transmission/receiver automatic networking, support point-to-point, point-to-multipoint, transmission/receiver flexible switching. WDS networking mode, video network dual compatible. The transmission speed between 2 bridges max is 1200Mbps. The highest network speed that can be achieved max is 1Gbps.

1Gbps Wireless ethernet bridge conducted deep protocol optimization for wireless video surveillance transmission to ensure high-speed video transmission and smooth video surveillance, and the underlying wireless driver is optimized in-depth, using 5.8G IEEE 802.11ac single-band wireless transmission technology, with stronger anti-interference ability and better stability

Outdoor wireless bridges adopting low power consumption and high-performance design, the RF index and radiation index are in full compliance with national standards. Supports dynamic MIMO power saving mode (DMPS) and automatic power-saving transmission (APSD), supports 24V POE power supply, is easy to install and deploy, simplifies construction, safe and reliable. Automatically re-pair when power is restored after a power outage.

Point-to-point wireless bridge built-in 16dBm directional antenna, maximum 27dBm can automatically power adjustment to adapt to environmental changes, ensuring smooth video regardless of ultra-close distance, transmission distance up to 3km(Barrier-free), actual application distance should be less than 3KM.FCC ID: 2A6EJ-CPE450

Package Included:
2 * CPE830 Gigabit Bridge
2 * Gigabit POE Adapter (24V)
2 * Cat 5e Network Cable
2 * Metal Hoop
1 * User Manual

How to Access and Setting the Wireless Bridge CPE Through Computer Access:

Step 1. Use a PoE adapter to power the wireless bridge through a network cable. Pay attention to the "PoE" and "LAN" ports marked on the PoE adapter, and power is supplied by POE instead of a DC power interface.
Step 2. Use a network cable to connect the CPE "LAN" port, connect the network cable other ends to the PoE Adapter "POE" port, use another network cable to connect to the "LAN" port of the PoE adapter, and connect the other end of the network cable to the computer's "LAN" port.
Step 3. Find the number of the Wireless Bridge CPE digital display tube. For example, the number is 1 and the CEP is the A master bridge, then the IP of this CPE is 192.168.255.101; if the CPE is the B slave bridge, then the IP address of the CPE is 192.168.255.201.（There is a table corresponding to a number and IP in the manual）
Step 4. Very important step: Modify your computer's IP address, change your computer's IP address to 192.168.255.xxx(192.168.255.xxx cannot be the same as the IP of the CPE), make your computer's IP and the bridge's IP address be on the same network segment so that you can access them. Please refer to the manual to modify the computer IP address step or Google searches how to modify the computer IP address, it is very simple.
Step 5. After you modify your computer's IP address, you open the computer browser and enter the IP address of the wireless bridge to access. For example, enter 192.168.255.101 to access.
Step 6. Enter the account password "admin/admin" to access, and set it after successful access.

Purchase Tips: The installation of this device requires some network knowledge. If you can't install it, please let us know or contact a professional. If the product is damaged or missing accessories, please let us know to reissue a new set. This CPE cannot directly expand the WiFi range for you. If you have any questions, you can free feel to let us know via Amazon or Email, we will quick response and help you solve your questions.

How to find and change CPE830 WiFi SSID and password?

1. Find the WiFi hotspot password of CPE830, path: Setting-->Wireless--> Name(SSID) and Password.

2. Enter the new SSID and password and save.

Product Description

UeeVii 5.8G CPE830 Gigabit Wireless Bridge with 48V PoE

Share your home internet to any second building on your property—be it a garage, barn, warehouse or shop

The highest achieved Internet speed is 433Mbps

No more laying Ethernet cables, and no extra network subscription fees

One Key Paring


Step 1:Set the bridge Dial a bridge to A(Master Bridge) and the other bridge to B(Slave Bridge)	Step 2:Set the channel Each time you short press the "Reset" key,the value of each digital tube increases by one (0-9-A-F cycle),pair two bridges with the same value	Step 3:Pairing successful The signal strength light turns on to indicate successful pairing