Packing List:
Main unit 1 pc
Boost pipes 3 pcs
Boosting pipes British system*4,NO.2 Metric system*4
Power wire 1pc
Parameters of Oral Anesthesia Injector:
a)Classification by type of protection against electric shock: internal power supply equipment;
b)Classified according to the degree of protection against liquid ingress: IPXO;
c)Classification by operating mode: continuous operation;
d)The rated voltage and frequency of the equipment:the host is Dc 3.7V; the charging stand is d.c.5.0V;
e)No signalinput,no signal output part;
f)for non-permanently installed equipment;
Working Environment:
Environmental temperature:+5℃-+40℃
Relative humidity:≤80%RH
Air pressure:700hPa-1060hPa(1 atm=1013.25hPa)
Storage and Transportation:
◆This equipment should be handled carefully,kept away from shaking point,installed or stored at shadowy,dry,cool and ventilated places.
◆Don't store it together with articles that are combustible, poisonous,caustic and explosive.
◆This equipment should be stored in the environment where the relative humidity is 10%-93%,the atmosphere pressure is 70kpa to 106kpa and the Temperature is-10℃ to+55℃.
◆Excess impact or shake should be avoided during trans portation.
◆Don't mix it with dangerous articles during transportation.
◆Keep it away from sun or snow or rain during transportation.

Important Notice For U.S.A Buyer
The following FDA Disclaimer is required for all eBay listing in healthcare category:
The sale of this item may be subject to regulation by the U.S. Food & Drug Administration and state and local regulatory agencies.You can bid on this item if you are an authorized purchaser. If the item is subject to FDA regulation, We will verify your status as an authorized purchaser of this item before shipping of the item.If you have questions about legal obligations regarding sales of medical devices, you should consult with the FDA's Center for Devices and Radiological Health.
(This dental items is not meant to replace your doctor diagnostic. It is mainly for your piece of mind and comfort.)

Seller name: Dreamland Company
City, State: Beijing, China

510(K) Number: K181691
Regulation Number: 872.4200
Classification Product Code: EFB
Subsequent Product Code: EGS
FDA for Curing Light:
510(K) Number: K192233
Regulation Number: 21 CFR 872.6070
Product Code: EBZ

FDA for Handpiece:
510(K) Number: K181691
Regulation Number: 872.4200
Classification Product Code: EFB
Subsequent Product Code: EGS

FDA for Scaler:
510(K) Number: K163414
Regulation Number: 872.4850
Product Code: ELC

FDA for Handpiece:
510(K) Number: K181691
Regulation Number: 872.4200
Classification Product Code: EFB
Subsequent Product Code: EGS

Datacaciques