Vertical Blinds Headrail
3.5" (89mm) 

*** Slats not included ***

Replacement Vertical Blind Headrail, which is made to size.
Complete kit which includes all the fittings as well as either a wand or chain & Cord to operate.

Any headrail over 3.8m we can do, although message us first as a delivery surcharge may apply

  1. Select from the listing the size group that matches your size.
  2. Select the 'Draw Type' which will include whether you want a wand or cords.
  3. Remember, these are only suitable for the 89mm slats.
  4. Confirm the width size you are after in either a message or the notes during purchase, while also confirming whether the measurement that it is a recess size.
  5. Also confirm the drop so we know what length we would need to make the cords etc to make sure it ties in with the 'Child Safety' laws.
  6. Bare in mind, if you are providing the recess size, we will make slight adjustments, so it will fit.
  7. Brackets - Top Fix sent out as standard if Face Fix brackets are required please make this clear when you send us your headrail sizes.
MEASURING:

Recess size

This is where you measure wall to wall of the recess that the headrail will fit within.  We would make a slight adjustment to allow the headrail (and side cog) sit within the recess.

Actual Size

This is normally when you are fitting the blind outside of the recess and you give us the actual dead size you need (including the headrail and side cog)


The Drop - Install height (Needed so we can make the cord the correct length)

If you need the cord to be a specific length please confirm this when you order, we recommend they are 1.5m off the floor. Please take the install height measurement and reduce it by 1.5m and confirm this with us.

if not stated cords will be made aprox 60cm as standard.

If you have any questions, please don't hesitate to contact us