Why purchase a recycled keyless entry remote transmitter?

The vehicle keyless remote key fob you are going to purchase from us is pre-owned; aka: used, previously loved ;). We recycle OEM and aftermarket keyfobs and put them through a concise refurbishing process so we can guarantee our products are delivered to you in a ready-to-program state. We offer these car clickers at a significant cost savings to stealerships so you can keep your hard earned cash for something more fun while lightening your ecological footprint J. We call that a win-win! Why wait? Add some convenience to your daily routine and help save the environment, order your recycled car remote control today!

Installed RKE System Type: Please be sure you have an AFTERMARKET (RKE) remote keyless entry system. If your current remote looks the same then this will work. Other options include: Dealer Installed or Factory. The system installed in your vehicle will CHANGE the required remote. If you are unsure send us a message with your current remotes FCC ID and Part # and LED Light color. If you no longer have your remote then send us a message with your system brand, and system id #.

What are you purchasing ? This is ONE (1) replacement keyless entry remote control that will work with your AFTERMARKET installed RKE system.

Compatibility: Works with vehicles that use a compatible aftermarket RKE (remote keyless entry) system installed. See our compatible system list below or match your current remote FCC ID and / or part # or circuit board # and LED Light color (if applicable)to the numbers listed below.

AM HDR ASRF-3510DG
C ID: 1513A-2510 AM HDR
Model Number: AS145, ASRA2510FBK, ASRA2510 
Compatible Antenna Number: SH433-120  
Transmitting Frequency:433 MHz
Is this a 1 Way Keyfob?:  Yes 

Hood Pin Equipped Vehicles

    Press and hold the hood-pin for 4 seconds

    What is a hood-pin?
     
    Release the hood-pin (the parking lights will turn on)      

    What are parking lights?


    While the parking lights are on, press the hood-pin once more and release immediately
    The parking lights will now stay on for up to 20 seconds
    Before the parking lights go out, turn the ignition key ON (RUN Position) and immediately to the OFF position 
    Press and HOLD the LOCK button of the key fob you are trying to program and keep it held down until the parking lights flash 5 times quickly (may be followed by 2 slow flashes, not all the time though)
    The key fob has now been stored to memory

If you have additional key fobs to program, repeat step 5 and 6 at this time. *Systems can hold a maximum of 4 remotes  


NO HOOD PIN? How To Program 

Option 1: (if the antenna on your windshield HAS an Antenna Programming Assistance Button (A.P.A.B.) 

    Make sure the hood is closed
    Turn the ignition key to the IGNITION ON (RUN) position
    Within 5 seconds, press the programming button on the antenna twice for 1 second each time. THE LED WILL COME ON SOLID.
    You now have 20 seconds to select one of the sub-menus (proceed with transmitter programming procedure below:

Note: To exit programming mode, press on the antenna button once (the LED will come ON) and release.

Transmitter Programming Programming Procedure

    Before the lights go out, turn the ignition key to the Ignition Off position, then to On (Run) position and immediately to the OFF position. OFF/ON/OFF
    Press and hold the LOCK button and keep it down until the parking lights flash 5 times quickly. The transmitter has been stored to memory AFTER the 5 flashes, meaning programming is completed.

You must repeat the above process to add additional transmitters.

 

Option 2: (If the A.P.A.B. button is not present on the antenna)
Here is a YouTube video we have made to assist with programming if your vehicle does NOT have a hood pin:

Why does your vehicles installed RKE / Security system determine which remote control your can purchase?

The remotes job is to pair with your vehicles installed RKE system. It will only sync to a matching system; therefore, you cannot purchase a different type of remote than the remote manufactured with the system. It will not pair with a foreign system.

Programming:

We will send you information on how to locate programming requirement/instructions for your make, model, and year vehicle. Some vehicles have DIY (do-it-yourself) programming instructions available. While other vehicles require diagnostic programming which is available at your local qualified automotive locksmith or dealer.

Programming Requirement Information NOTE:

The vehicle manufacturers determine the programming requirements at the time of manufacture. We pass the programming requirements / instructions on to you as a courtesy. We do not write the programming nor do we determine which vehicles require diagnostic programming and which vehicles can be programmed by the you (DIY). We are not locksmiths nor mechanics nor are we familiar with EVERY vehicles program sequence. If you have questions:

        1. Check your Vehicle Owners Manual for OEM Factory remotes or The User Manual for Dealer Installed or Aftermarket RKE systems.

 2. YouTube has many video postings from do-it-yourselfers to assist with all kinds of questions & most customers find if very helpful to WATCH the programming being done which can eliminate mistakes in the sequence.

To locate the programming for your vehicle via this method go to YouTube and once there in the search bar type in the following:

i.      If you have a factory RKE system: your make model year + the words program remote (i.e.: 2005 Ford Mustang program remote)

ii.      If you have a dealer installed or aftermarket RKE system: the FCC ID or system type + the words program remote (i.e.: ELVAT5C program remote or AS200 program transmitter?)

 3. For OEM FACTORY installed systems: send us an eBay message with your vehicles make, model & year = we can pass on to you any programming information requirements we have on hand.

 4. For DEALER INSTALLED RKE installed systems: send us an eBay message with your remote controls FCC ID # and PART# and the vehicles make, model, & year = we can pass on to you any programming information requirements we have on hand (the programming for dealer installed RKE systems will be different than Factory or Aftermarket installed RKE systems).

 5. For AFTERMARKET INSTALLED RKE installed systems: send us an eBay message with your remote controls FCC ID # and PART# = we can pass on to you any programming information requirements we have on hand (the programming for aftermarket installed RKE systems will be different than Factory or Dealer installed RKE systems).

6. There are also many auto forums that you can go onto by just conducting a google search with your questions.

7.  or a local automotive locksmith or your local parts/car/audio store will typically be able to assist you if you are trying to avoid the dealer.