■ Description:
100% New & High Quality
Replaced Part Number: 13598771/13586335
Operating Frequency: 315 MHz
■ Feature:
✅ VEHICLE FITMENT - These TPMS sensors are compatible with a variety of vehicles, including For Chevrolet Silverado, For Equinox, For Malibu; For GMC Sierra, For Acadia; For Cadillac CTS, For Escalade; For Buick Enclave, For LaCrosse; For Hummer H2, and more.
✅ REFERENCE PART NUMBER - TPMS sensors set of 4 replaces 13598771 23445327 13586335 22853741 20923680 25920615 15922396 25799331 15254101. 13540601
✅ NO SENSOR PROGRAMMING REQUIRED - The tire pressure monitor system (TPMS) come pre-programmed specifically for your make/model/year of vehicle,just need activate them with scan tool.
✅ DURABLE DESIGN, LEAK-PROOF - Features an exact OEM design for fit onto your wheel's valve stem hole, ensuring a seamless seal against air leaks. The outer shell is made of high-strength ABS+PC material, while the internal precision chip is treated with waterproof, shockproof, and corrosion-resistant coatings. It is designed to withstand extreme temperatures ranging from -40°C to 125°C, ensuring stable performance in rain, snow, and challenging road conditions, providing long-lasting durability.
✅ ENERGY-EFFICIENT, EXTENDS TIRE LIFE - Accurate tire pressure monitoring reduces wear and tear, boosts fuel efficiency, and saves you money on driving costs.
✅ REAL-TIME MONITORING - Equipped with a high-sensitivity pressure sensing chip, it continuously monitors tire pressure 24/7. If the pressure is too high, too low, or if a rapid air leak occurs, the system will promptly alert you through the vehicle's dashboard, helping you avoid potential issues and ensuring safe travels every time.
■ Note:
Please check the picture and the part number carefully to make sure that you bought the right part for your car.The only way to be 100% sure that the part will fit your vehicle is to check your part,You can also email us before purchasing, we will check for you and reply soon within 24 hours.
Please check the picture and the part number carefully to make sure that you bought the right part for your car.The only way to be 100% sure that the part will fit your vehicle is to check your part,You can also email us before purchasing, we will check for you and reply soon within 24 hours.
■ Product Features:
Safe and Reliable --- It is suitable for monitoring the internal pressure,temperature and other information of the tire,avoiding traffic accidents caused by tire failure,provide you with a better safety in the driving process.
No programming required --- The tire pressure monitor system (TPMS) come pre-programmed specifically for your make/model/year of vehicle.
Safe and Reliable --- It is suitable for monitoring the internal pressure,temperature and other information of the tire,avoiding traffic accidents caused by tire failure,provide you with a better safety in the driving process.
No programming required --- The tire pressure monitor system (TPMS) come pre-programmed specifically for your make/model/year of vehicle.
Please make sure your existing part number matches one of the numbers listed above.If the number(s) do not match,then the part will not work with your vehicle.
■ Installation Process for reference only :
1. Loose the tire: Remove the valve cap and core and deflate the tire.
2. Dismount the tire: Clamp the tire onto the tire changer, and adjust the valve at 1 o’clock relative to the tire separation head. Insert the tire tool and lift the tire bead onto the mounting head to discount the head.
3. Dismount the sensor: With a screwdriver remove the fastening screw and sensor from the Valve stem, then loosen the nut and remove the valve.
4. Mount sensor and valve: Slide the valve stem through the valve hole of the rim. Tighten the screw-nut with 4.0 Nm with the help of the positioning pin. Assemble the sensor body against the rim and tighten the screw.
5. Mount the tire: Place the tire on the rim, making sure that the valve faces the separation head at an angle of 180 degrees. Mount the tire over the rim.
1. Loose the tire: Remove the valve cap and core and deflate the tire.
2. Dismount the tire: Clamp the tire onto the tire changer, and adjust the valve at 1 o’clock relative to the tire separation head. Insert the tire tool and lift the tire bead onto the mounting head to discount the head.
3. Dismount the sensor: With a screwdriver remove the fastening screw and sensor from the Valve stem, then loosen the nut and remove the valve.
4. Mount sensor and valve: Slide the valve stem through the valve hole of the rim. Tighten the screw-nut with 4.0 Nm with the help of the positioning pin. Assemble the sensor body against the rim and tighten the screw.
5. Mount the tire: Place the tire on the rim, making sure that the valve faces the separation head at an angle of 180 degrees. Mount the tire over the rim.
■ Package Included:
4Pcs TPMS Sensors