Fitment:for Toyota AVENSIS 2003-2009OE Number:798005770Product Characteristics:This MAP sensor is used to calculate air density and determine the engine's air mass flow rate and provides instantaneous manifold pressure information to the engine's electronic control unit. As the MAP sensor fails, it can cause various issues with the fuel system and vehicle performance.Direct replacement and installation without special tools, convenient to use.Package included:1 Pc MAP SensorInstallation:1.Install: Remove old sensor; mount new in engine bay (passenger side).2.Vacuum Wiring: Connect to BOV source; route wires through firewall to door; link to MAP power (note signal).3.ECU: Plug into ports (see manual); ECU under p-side carpet.4.Bypass: Splice new power/ground to factory; insulate old signal; connect new to UTEC.5.Calibrate: In UTEC (Edit Maps>Params>Special), input intercept/gradient per manual's voltage/pressure.6.Test: To drive and check loose/solder issues.Note:This is a non-OEM product, accessory ONLY!Please make sure your model's ENGINE and TRIM are as described before purchasing!
No.798005770 Manifold Absolute Pressure MAP Sensor for Toyota AVENSIS 2003-2009
Fitment:
for Toyota AVENSIS 2003-2009
OE Number:
798005770
Product Characteristics:
This MAP sensor is used to calculate air density and determine the engine's air mass flow rate and provides instantaneous manifold pressure information to the engine's electronic control unit. As the MAP sensor fails, it can cause various issues with the fuel system and vehicle performance.
Direct replacement and installation without special tools, convenient to use.
Package included:
1 Pc MAP Sensor
Installation:
1.Install: Remove old sensor; mount new in engine bay (passenger side).
2.Vacuum Wiring: Connect to BOV source; route wires through firewall to door; link to MAP power (note signal).
3.ECU: Plug into ports (see manual); ECU under p-side carpet.
4.Bypass: Splice new power/ground to factory; insulate old signal; connect new to UTEC.
5.Calibrate: In UTEC (Edit Maps>Params>Special), input intercept/gradient per manual's voltage/pressure.
6.Test: To drive and check loose/solder issues.
Note:
This is a non-OEM product, accessory ONLY!
Please make sure your model's ENGINE and TRIM are as described before purchasing!
Item Specifics
Brand
X AUTOHAUX
Net Weight
24g
Material
Metal, Rubber, Plastic
OE/OEM Part Number
798005770
Manufacturer Part Number
798005770
Product Name
Manifold Air Pressure Sensor
Other Part Number
798005770
Package Content
1 Pc Manifold Air Pressure Sensor
Note
This is not oem product,accessory only.
You Should Know
If you have any questions, please feel free to contact our customer service. Our response will be faster than eBay !
Our Handling Time: within 24 hours on weekdays
eBay Handling Time: 72 hours
About Us
Angstrom Autohaus is based in Hong Kong, our group comprises factories in Asia that manufacture OEM and aftermarket automotive parts and accessories.
We believe in FACTORY DIRECT purchases.
Our mission is to deliver Lower Prices and Better Quality to consumers and distributors wherever, whenever.
We operate from a distribution center in Hong Kong, where we perform sourcing, quality control and fulfillment. We strive to ensure that our products are reliable, updated and that our transactions are smooth and speedy. We are positioned to bring you the latest consumer automotive aftermarket parts and accessories globally and round the clock.
We are proud to have served over 500, 000 ebay buyers worldwide.
Shipping
Import duties, taxes and charges are not included in the item price or shipping charges. Buyers are responsible for these charges.
Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying.
Note that delivery times may vary, particularly during peak periods or inclimate weather conditions.
All items will be dispatched from our warehouse in China or Hong Kong directly.
Due to Custom restrictions, we do not ship lighters to US
We cannot ship on weekends and we do not offer Saturday, Sunday or holiday delivery.
All our items will be shipped to buyer's PayPal address, please confirm your address on PayPal before you bid.
Feedback
We left positive feedback for you after receiving payment. Your feedback is very important for us, positive feedback and 5 Score DSR is highly appreciated.
Please let us know before leaving any negative feedback or 1 point, 2 point low DSR or open any disputes on Paypal and Ebay, please give us the opportunity to resolve any problems and we will try our best to satisfy your needs.
If any question, please feel free to contact us via 'Ask seller a question', We try our best to reply to your emails as soon as possible, due to high volume of daily incoming emails and time zone difference, we may not be able to reply your emails immediately.Please allow 1-2 business days for us to response.
Contact Us
This is the payment method we can accept:
Contact Us
Please email us to resolve any problem before you leave any feedback to us. We will reply you via email ASAP, if no response for you within 48 hours, please check the spam / junk folder in your mail box.
No.798005770 Manifold Absolute Pressure MAP Sensor for Toyota AVENSIS 2003-2009
Fitment:
for Toyota AVENSIS 2003-2009
OE Number:
798005770
Product Characteristics:
This MAP sensor is used to calculate air density and determine the engine's air mass flow rate and provides instantaneous manifold pressure information to the engine's electronic control unit. As the MAP sensor fails, it can cause various issues with the fuel system and vehicle performance.
Direct replacement and installation without special tools, convenient to use.
Package included:
1 Pc MAP Sensor
Installation:
1.Install: Remove old sensor; mount new in engine bay (passenger side).
2.Vacuum Wiring: Connect to BOV source; route wires through firewall to door; link to MAP power (note signal).
3.ECU: Plug into ports (see manual); ECU under p-side carpet.
4.Bypass: Splice new power/ground to factory; insulate old signal; connect new to UTEC.
5.Calibrate: In UTEC (Edit Maps>Params>Special), input intercept/gradient per manual's voltage/pressure.
6.Test: To drive and check loose/solder issues.
Note:
This is a non-OEM product, accessory ONLY!
Please make sure your model's ENGINE and TRIM are as described before purchasing!
Item Specifics
Brand
X AUTOHAUX
Net Weight
24g
Material
Metal, Rubber, Plastic
OE/OEM Part Number
798005770
Manufacturer Part Number
798005770
Product Name
Manifold Air Pressure Sensor
Other Part Number
798005770
Package Content
1 Pc Manifold Air Pressure Sensor
Note
This is not oem product,accessory only.
You Should Know
If you have any questions, please feel free to contact our customer service.Our response will be faster than eBay !
Angstrom Autohaus is based in Hong Kong, our group comprises factories in Asia that manufacture OEM and aftermarket automotive parts and accessories.
We believe in FACTORY DIRECT purchases.
Our mission is to deliver Lower Prices and Better Quality to consumers and distributors wherever, whenever.
We operate from a distribution center in Hong Kong, where we perform sourcing, quality control and fulfillment. We strive to ensure that our products are reliable, updated and that our transactions are smooth and speedy. We are positioned to bring you the latest consumer automotive aftermarket parts and accessories globally and round the clock.
We are proud to have served over 500, 000 ebay buyers worldwide.
Import duties, taxes and charges are not included in the item price or shipping charges. Buyers are responsible for these charges.
Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying.
Note that delivery times may vary, particularly during peak periods or inclimate weather conditions.
All items will be dispatched from our warehouse in China or Hong Kong directly.
Due to Custom restrictions, we do not ship lighters to US
We cannot ship on weekends and we do not offer Saturday, Sunday or holiday delivery.
All our items will be shipped to buyer's PayPal address, please confirm your address on PayPal before you bid.
We left positive feedback for you after receiving payment. Your feedback is very important for us, positive feedback and 5 Score DSR is highly appreciated.
Please let us know before leaving any negative feedback or 1 point, 2 point low DSR or open any disputes on Paypal and Ebay, please give us the opportunity to resolve any problems and we will try our best to satisfy your needs.
If any question, please feel free to contact us via 'Ask seller a question', We try our best to reply to your emails as soon as possible, due to high volume of daily incoming emails and time zone difference, we may not be able to reply your emails immediately.Please allow 1-2 business days for us to response.
This is the payment method we can accept
Please email us to resolve any problem before you leave any feedback to us. We will reply you via email ASAP, if no response for you within 48 hours, please check the spam / junk folder in your mail box.