• What is an axle housing?
  • The axle housings serve as mounting points for the front and rear axles and contain the bearing assemblies that support the axles.
  •  
  • Description:

    • Wonderful-idea

    Pair Front CV Axle Shaft For Acura TSX 2008-2014 Honda Accord 2014 Civic 2.4L l4

    What is an axle housing?

    The axle housings serve as mounting points for the front and rear axles and contain the bearing assemblies that support the axles.

     

    Description:

    • New CV Axle Assemblies
    • ISO / IATF 16949 certified, direct fit and made from high quality materials to meet orginal specifications
    • Built to last - temperature and pressure resistant grease prevents friction and wear
    • Premium quality neoprene boots with secure clamps prevent grease leakage and premature boot failure
    • When replacing CV Axles in pairs, complete the installation on one side before removing the axle from the other side,

    otherwise the differential gears may become misaligned which requires the transaxle to be taken apart so the gears

    can be reassembled.

     

    Axles should always be replaced in pairs (Passenger and Driver).

    This reduces the overall time required to replace two axles at different times.

     

    Item Specifics:

    UPC: Does not apply

    Drive Type: FWD

    Manufacturer Part Number: 44305T2AA50,APCVA1282, 44305T2AA71, 44306T3VA00, 44305TA0A00, 66-4250, 44305TA0A50, 44306TL2E50, 66-4251, 44306T2AA50

    Manufacturer Warranty: Lifetime

    Quantity: 2

    Fitment Type: Direct Replacement

    Part Type : CV Axle Assembly,CV Axle Shaft

    Surface Finish: Painted

    Material: steel

    Superseded Part Number: 66-4251,66-4250

    Mounting Hardware Included: No

    Input Shaft Connection Style: Splined

    Input Shaft Spline Count : 27

    Output Shaft Connection Style: Splined

    Output Shaft Spline Count: 30

    Transmission Type: Automatic,Manual

    ABS Ring Included: NO

    Axle Nut Locking Type: Stake

    Spindle Nut Included: Yes

    Number of Outboard Splines: 30 Teeth

    Output Shaft Connection Style: Spline

    Shaft Material: 40CR

     

    Part Number:

    DSK1161PR 66-4250 66-4251 60-4250 60-4251 60-4260 HO-8243

    66-4266 HO-8422, 60-4266 HO-9529 HO-8242 HO-8421 HO-9530

    HO-8235 HO-9520 HO-8247

     

    OE / OEM Part Numbers:

    44306TA0A50, 44306TL2E50, 44306T2AA00, 44306T2AA50, 44306T3VA00, 44306TA0A00, 44305TA0A50, 44305TL2E50, 44305T2AA50, 44305T2AA71, 44305TA0A00, 44305TA0A50, 664250, 664251, 66-4250, 66-4251

     

    Compatibility Chart:

     

    Make    Model    Year    Notes    Position
    Acura    TSX    2009    All Trim Levels    Front
    Acura    TSX    2010 - 2012    2.4L    Front
    Acura    TSX    2013    2.4L | Automatic Transmission    Front
    Honda    Accord    2008 - 2012    2.4L    Front
    Honda    Accord    2013 - 2014    2.4L | Manual Transmission    Front
    Honda    Civic    2014    EX | 1.8L | Manual Transmission    Front

     

    STEP-BY-STEP GUIDE ON HOW TO REPLACE CV JOINTS：

    • Prioritise safety precautions by parking the vehicle on a level surface, engaging the parking brake and wearing appropriate safety gear. This includes gloves and safety glasses. Safety should be a top priority throughout the entire process.
    • Utilise the hydraulic jack to lift the front or rear of the vehicle, depending on the axle you’re replacing. Once lifted, secure the vehicle on jack stands to provide a stable working environment. 
    • Use the lug wrench to remove the wheel on the side where you’ll be replacing the CV joint and axle.
    • Start by removing the cotter pin from the castle nut on the ball joint. Proceed to loosen and remove the castle nut. Use a pry bar to carefully separate the ball joint from the steering knuckle. Also, check the signs of bad ball joints when disconnecting suspension components.
    • Remove the calliper bolts and hang the calliper out of the way. If necessary, detach the ABS sensor or brake line, ensuring that brake components are appropriately handled during the process.
    • Locate and remove the axle nut using the appropriate socket. This is a crucial step in releasing the CV joint and axle from the wheel hub.
    • Using a pry bar, gently release the CV joint from the car’s transmission or differential. Pull the axle out from the wheel hub, carefully navigating through any obstacles in its path.
    • Insert the new axle into the wheel hub assembly, securing it properly. Pay attention to aligning the splines and push the axle into the transmission or differential, ensuring a snug fit.
    • Reattach the ball joint to the steering knuckle and tighten the castle nut.Install a new cotter pin.Reconnect the calliper, ABS sensor and any other components you detached.Tighten the axle nut to the manufacturer’s specifications.Put the wheel back on and lower the vehicle.

    CAN I REPLACE THE CV AXLES BY MYSELF?
    Yes, it’s possible to replace CV axles yourself if you have the necessary tools and skills. For that, you need to follow proper safety precautions.

    HOW LONG DOES IT TAKE TO REPLACE CV AXLES?
    Replacing a single CV axle typically takes about 1.5 to 3 hours. If you’re replacing all four axles, it can take up to 12 hours, factoring in both parts and labour costs. However, replacing only one axle is usually sufficient if needed.In most cases, however, detecting a split boot before joint damage occurs is difficult, necessitating a complete CV joint replacement.

     

    Package Included:

    2X Front CV Axle Shaft
     

    Why Us:
    We are a manufacture who specialize in ignition systems and have been in auto parts industry for over 5 years, offering HIGH QUALITY ignition system Brand that 100% factory tested with competitive price. And 1 year warranty offered with no hassle or questions asked.

     

    Certificates of our product:

     

     

    Our Factory:



     


    Item Specifics
    Cotter Pin Included No
    Brand Carbole
    Placement on Vehicle Front, Left, Right
    Axle Nut Locking Type Open Groove
    Axle Nut Hex Size 1.42 in / 36 mm
    OE/OEM Part Number 66-4250, 66-4251
    Manufacturer Warranty Lifetime
    Axle Boot Material Neoprene
    Axle Nut Thread Size M26 x 1.5
    Fitment Type Direct Replacement
    Grease Type Molybdenum Disulfide Lithium Grease
    Output Shaft Connection Style Spline
    Input Shaft Connection Style Spline
    Drive Type FWD
    Transmission Type Automatic
    Interchange Part Number2 66-4250 66-4251 60-4250 60-4251 60-4260 HO-8243
    Interchange Part Number3 66-4266 HO-8422, 60-4266 HO-9529
    Interchange Part Number4 HO-8242 HO-8421 HO-9530 HO-8235 HO-9520 HO-8247
    Year 2008 2009 2010, 2011 2012 2013 2014
    Fitment 1 2009 Acura TSX All Trim Levels
    Fitment 2 2010 - 2012 Acura TSX 2.4L
    Fitment 3 2013 Acura TSX 2.4L Automatic
    Fitment 4 2008 - 2012 Honda Accord 2.4L
    Fitment 5 2013 - 2014 Honda Accord 2.4L Manual
    Fitment 6 2014 Honda Civic EX 1.8L Manual
    Hardware Included No
    Number of Outboard Splines 30 Teeth
    Shaft Material 40CR
    fit car Honda
    fit model Accord
    Manufacturer Part Number HD305001, 44306T2AA00, 44306T2AA50, 44306T3VA00, 44306TA0A00
    Surface Finish Black Coating
    Fitment 7 For Acura TSX 2013 L4 2.4L (with Automatic Transmission)
    Fitment 8 For Honda Accord 2013-2014 L4 2.4L (w/ Manual Transmission)
    Fitment 9 Acura TSX 2009-2012 L4 2.4L
    Fitment 10 Honda Accord 2008-2012 L4 2.4L
    Fitment 11 For Honda Civic 2014 L4 1.8L (for EX w/ Manual Transmission)

    Payment

    We can accept Credit card, Debit card, Apple Pay, Google Pay and PayPal,thank you. O(∩_∩)O

    Shipping

    1. We do not offer combine shipping service. You need full amount of each shipping fee and insurance.
    2. We will ship in 1-2 business days after payment clears.
    3. Additional shipping fee will be charged for buyers from Puerto Rico,Hawaii,Alaska,Guam,the U.S. military address of the United States and the nonnative American address please contact our customer service for the details of extra shipping fee.
    4. We don't ship to PO.BOX if the package are big, as USPS express don't accept it, so please leave us your valid physical street address.

    Returns

    1.Please Do Not click "Return this item" in any situation.Because sometimes it will spend more time to resolve the issue for those items needn't to be returned for a replacement after fully communication. Click "Contact seller" via Ebay Message(protected by Ebay),that is the fastest way to solve any problem for you.

    2. If you received and incorrect,damaged,defective,or item not as described, contact us for a partial/full refund or replacement on our cost. 

    3. If you want to return the item, please contact us within 60 days after package received.Return products must also be in its original condition: including box, packaging and all other accessories.

    4. Products can be returned within 60 days after receiving it. Hoever, If the products didn't have any problems, buyer should pay for the return shipping cost. It's really important that you love your purchase from us.

    Customer Services
    1.We fully guarantee customers an exchange or refund within 30 business days of receipt if item DOA (damage on arrival).
    Warranty excludes normal product lifetime wear-out, wear and tear or abuse.
    2. Warranty does not apply to conditions resulting from misuse, abuse, negligence, accident, improper application, improper installation or alteration.
    3. For malfunction products under warranty period, please contact our customer service via EBay Message.
    About PAL

    PAL is one of the most experienced manufacturers in performance fuel and ignition systems around the world, proving itself on the racetracks and drag strips of the world – and on the street. With an ever-expanding line of coils and all the spark plug wires, tune-up kits, and fuel injectors hot roders have trusted and relied on for years, PAL is constantly developing innovative new products designed to push power, speed, and performance to match advancements in automotive technology. As always, PAL offers a comprehensive selection of performance products, including coils, digital fuel injection systems, fuel injectors, distributors, caps, rotors, ignition wires, spark plugs.

     

    Wonderful-idea

    Brand

    content_src_url

    content_src_url

    Shop Category
     Store Home
     Ignition Coils
     Ignition Wire Kits
     Ignition Distributor
     Pump
     Pressure Tester Gauge
     Thermostat
     Car & Truck Parts
     Boat Parts
     Other
    Hot Item
    New List Item
    Service

    content_src_url
    Pair Front CV Axle Shaft For Acura TSX 2008-2014 Honda Accord 2014 Civic 2.4L l4

    What is an axle housing?

    The axle housings serve as mounting points for the front and rear axles and contain the bearing assemblies that support the axles.

     

    Description:

    • New CV Axle Assemblies
    • ISO / IATF 16949 certified, direct fit and made from high quality materials to meet orginal specifications
    • Built to last - temperature and pressure resistant grease prevents friction and wear
    • Premium quality neoprene boots with secure clamps prevent grease leakage and premature boot failure
    • When replacing CV Axles in pairs, complete the installation on one side before removing the axle from the other side,

    otherwise the differential gears may become misaligned which requires the transaxle to be taken apart so the gears

    can be reassembled.

     

    Axles should always be replaced in pairs (Passenger and Driver).

    This reduces the overall time required to replace two axles at different times.

     

    Item Specifics:

    UPC: Does not apply

    Drive Type: FWD

    Manufacturer Part Number: 44305T2AA50,APCVA1282, 44305T2AA71, 44306T3VA00, 44305TA0A00, 66-4250, 44305TA0A50, 44306TL2E50, 66-4251, 44306T2AA50

    Manufacturer Warranty: Lifetime

    Quantity: 2

    Fitment Type: Direct Replacement

    Part Type : CV Axle Assembly,CV Axle Shaft

    Surface Finish: Painted

    Material: steel

    Superseded Part Number: 66-4251,66-4250

    Mounting Hardware Included: No

    Input Shaft Connection Style: Splined

    Input Shaft Spline Count : 27

    Output Shaft Connection Style: Splined

    Output Shaft Spline Count: 30

    Transmission Type: Automatic,Manual

    ABS Ring Included: NO

    Axle Nut Locking Type: Stake

    Spindle Nut Included: Yes

    Number of Outboard Splines: 30 Teeth

    Output Shaft Connection Style: Spline

    Shaft Material: 40CR

     

    Part Number:

    DSK1161PR 66-4250 66-4251 60-4250 60-4251 60-4260 HO-8243

    66-4266 HO-8422, 60-4266 HO-9529 HO-8242 HO-8421 HO-9530

    HO-8235 HO-9520 HO-8247

     

    OE / OEM Part Numbers:

    44306TA0A50, 44306TL2E50, 44306T2AA00, 44306T2AA50, 44306T3VA00, 44306TA0A00, 44305TA0A50, 44305TL2E50, 44305T2AA50, 44305T2AA71, 44305TA0A00, 44305TA0A50, 664250, 664251, 66-4250, 66-4251

     

    Compatibility Chart:

     

    Make    Model    Year    Notes    Position
    Acura    TSX    2009    All Trim Levels    Front
    Acura    TSX    2010 - 2012    2.4L    Front
    Acura    TSX    2013    2.4L | Automatic Transmission    Front
    Honda    Accord    2008 - 2012    2.4L    Front
    Honda    Accord    2013 - 2014    2.4L | Manual Transmission    Front
    Honda    Civic    2014    EX | 1.8L | Manual Transmission    Front

     

    STEP-BY-STEP GUIDE ON HOW TO REPLACE CV JOINTS：

    • Prioritise safety precautions by parking the vehicle on a level surface, engaging the parking brake and wearing appropriate safety gear. This includes gloves and safety glasses. Safety should be a top priority throughout the entire process.
    • Utilise the hydraulic jack to lift the front or rear of the vehicle, depending on the axle you’re replacing. Once lifted, secure the vehicle on jack stands to provide a stable working environment. 
    • Use the lug wrench to remove the wheel on the side where you’ll be replacing the CV joint and axle.
    • Start by removing the cotter pin from the castle nut on the ball joint. Proceed to loosen and remove the castle nut. Use a pry bar to carefully separate the ball joint from the steering knuckle. Also, check the signs of bad ball joints when disconnecting suspension components.
    • Remove the calliper bolts and hang the calliper out of the way. If necessary, detach the ABS sensor or brake line, ensuring that brake components are appropriately handled during the process.
    • Locate and remove the axle nut using the appropriate socket. This is a crucial step in releasing the CV joint and axle from the wheel hub.
    • Using a pry bar, gently release the CV joint from the car’s transmission or differential. Pull the axle out from the wheel hub, carefully navigating through any obstacles in its path.
    • Insert the new axle into the wheel hub assembly, securing it properly. Pay attention to aligning the splines and push the axle into the transmission or differential, ensuring a snug fit.
    • Reattach the ball joint to the steering knuckle and tighten the castle nut.Install a new cotter pin.Reconnect the calliper, ABS sensor and any other components you detached.Tighten the axle nut to the manufacturer’s specifications.Put the wheel back on and lower the vehicle.

    CAN I REPLACE THE CV AXLES BY MYSELF?
    Yes, it’s possible to replace CV axles yourself if you have the necessary tools and skills. For that, you need to follow proper safety precautions.

    HOW LONG DOES IT TAKE TO REPLACE CV AXLES?
    Replacing a single CV axle typically takes about 1.5 to 3 hours. If you’re replacing all four axles, it can take up to 12 hours, factoring in both parts and labour costs. However, replacing only one axle is usually sufficient if needed.In most cases, however, detecting a split boot before joint damage occurs is difficult, necessitating a complete CV joint replacement.

     

    Package Included:

    2X Front CV Axle Shaft
     

    Why Us:
    We are a manufacture who specialize in ignition systems and have been in auto parts industry for over 5 years, offering HIGH QUALITY ignition system Brand that 100% factory tested with competitive price. And 1 year warranty offered with no hassle or questions asked.

     

    Certificates of our product:

     

     

    Our Factory:



     

    Item Specifics
    Cotter Pin Included :No
    Brand :Carbole
    Placement on Vehicle :Front, Left, Right
    Axle Nut Locking Type :Open Groove
    Axle Nut Hex Size :1.42 in / 36 mm
    OE/OEM Part Number :66-4250, 66-4251
    Manufacturer Warranty :Lifetime
    Axle Boot Material :Neoprene
    Axle Nut Thread Size :M26 x 1.5
    Fitment Type :Direct Replacement
    Grease Type :Molybdenum Disulfide Lithium Grease
    Output Shaft Connection Style :Spline
    Input Shaft Connection Style :Spline
    Drive Type :FWD
    Transmission Type :Automatic
    Interchange Part Number2 :66-4250 66-4251 60-4250 60-4251 60-4260 HO-8243
    Interchange Part Number3 :66-4266 HO-8422, 60-4266 HO-9529
    Interchange Part Number4 :HO-8242 HO-8421 HO-9530 HO-8235 HO-9520 HO-8247
    Year :2008 2009 2010, 2011 2012 2013 2014
    Fitment 1 :2009 Acura TSX All Trim Levels
    Fitment 2 :2010 - 2012 Acura TSX 2.4L
    Fitment 3 :2013 Acura TSX 2.4L Automatic
    Fitment 4 :2008 - 2012 Honda Accord 2.4L
    Fitment 5 :2013 - 2014 Honda Accord 2.4L Manual
    Fitment 6 :2014 Honda Civic EX 1.8L Manual
    Hardware Included :No
    Number of Outboard Splines :30 Teeth
    Shaft Material :40CR
    fit car :Honda
    fit model :Accord
    Manufacturer Part Number :HD305001, 44306T2AA00, 44306T2AA50, 44306T3VA00, 44306TA0A00
    Surface Finish :Black Coating
    Fitment 7 :For Acura TSX 2013 L4 2.4L (with Automatic Transmission)
    Fitment 8 :For Honda Accord 2013-2014 L4 2.4L (w/ Manual Transmission)
    Fitment 9 :Acura TSX 2009-2012 L4 2.4L
    Fitment 10 :Honda Accord 2008-2012 L4 2.4L
    Fitment 11 :For Honda Civic 2014 L4 1.8L (for EX w/ Manual Transmission)

    Payment

    We can accept Credit card, Debit card, Apple Pay, Google Pay and PayPal,thank you. O(∩_∩)O
    Shipping

    1. We do not offer combine shipping service. You need full amount of each shipping fee and insurance.
    2. We will ship in 1-2 business days after payment clears.
    3. Additional shipping fee will be charged for buyers from Puerto Rico,Hawaii,Alaska,Guam,the U.S. military address of the United States and the nonnative American address please contact our customer service for the details of extra shipping fee.
    4. We don't ship to PO.BOX if the package are big, as USPS express don't accept it, so please leave us your valid physical street address.

    Returns

    1.Please Do Not click "Return this item" in any situation.Because sometimes it will spend more time to resolve the issue for those items needn't to be returned for a replacement after fully communication. Click "Contact seller" via Ebay Message(protected by Ebay),that is the fastest way to solve any problem for you.

    2. If you received and incorrect,damaged,defective,or item not as described, contact us for a partial/full refund or replacement on our cost. 

    3. If you want to return the item, please contact us within 60 days after package received.Return products must also be in its original condition: including box, packaging and all other accessories.

    4. Products can be returned within 60 days after receiving it. Hoever, If the products didn't have any problems, buyer should pay for the return shipping cost. It's really important that you love your purchase from us.

    Customer Services
    1.We fully guarantee customers an exchange or refund within 30 business days of receipt if item DOA (damage on arrival).
    Warranty excludes normal product lifetime wear-out, wear and tear or abuse.
    2. Warranty does not apply to conditions resulting from misuse, abuse, negligence, accident, improper application, improper installation or alteration.
    3. For malfunction products under warranty period, please contact our customer service via EBay Message.
    About PAL

    PAL is one of the most experienced manufacturers in performance fuel and ignition systems around the world, proving itself on the racetracks and drag strips of the world – and on the street. With an ever-expanding line of coils and all the spark plug wires, tune-up kits, and fuel injectors hot roders have trusted and relied on for years, PAL is constantly developing innovative new products designed to push power, speed, and performance to match advancements in automotive technology. As always, PAL offers a comprehensive selection of performance products, including coils, digital fuel injection systems, fuel injectors, distributors, caps, rotors, ignition wires, spark plugs.

     


    All rights reserved.

    Datacaciques