MOLYKOTE® EM-50L High Performance Grease (60g)
MOLYKOTE® EM-30L is a high-performance synthetic grease made in Japan which is designed for plastic and metal components in electric and precision equipment. It offers excellent low-temperature performance, low oil separation, and outstanding compatibility with most plastics and elastomers which makes it ideal for gears, bearings, and sliding parts in automotive and electronic applications. We have repackaged this Molykote EM-50L into 60g containers under sterile conditions.
High-Performance Grease
Lubricating grease developed for plastic/metal components
How it compares to the Molykote EM-30L:
MOLYKOTE EM‑50L: Higher viscosity (~1,050 cSt @ 40 °C), designed for noise-reduction in plastic & metal gear applications, temperature range roughly: 40 °C to +150 °C.
MOLYKOTE EM‑30L: Much lower base oil viscosity (~90 cSt @ 40 °C), formulated for moderate to heavy loads in plastic/plastic and plastic/metal combinations, temperature range: 45 °C to +150 °C.
EM-50L is thicker and tuned for quiet, clean plastic/gear applications whilst the EM-30L is thinner and better for load/gear contact in mixed plastic/metal systems.
APPLICATIONS
• Automotive components
• Electric motors and gearboxes
• Precision instruments
• Office and home appliances
• Plastic and metal gears
FEATURES
• Excellent compatibility with most plastics and elastomers
• Low oil separation and smooth torque at low temperatures
• Effective noise and vibration reduction
• Long-term lubrication stability
• Silicone-free—safe for electrical contact areas
COMPOSITION
• Polyalphaolefin (PAO)
• Lithium soap
• PTFE, etc.
TEMPERATURE RANGE
From -45°C to +150°C
HOW TO USE
Clean the points of application. As is typical with lubricating greases, apply using a brush, spatula, or automatic lubrication device.
HANDLING PRECAUTIONS
This product may cause irritation to the skin or eyes. Wear appropriate protective equipment when handling. In case of contact with skin or eyes, rinse thoroughly with water and seek medical attention if required. Wash hands well after use. At temperatures exceeding 250°C, decomposition of fluorinated polymers may release small amounts of toxic gas. Ensure adequate ventilation is provided. This product has an expiry date of several years.