|
Description：
This product is a
one-component liquid, and its main ingredients include UDMA and other
multifunctional methacrylic resins. It does not contain solvents and inorganic
fillers, and is safe and harmless to the human body. The product is a
light-curing adhesive material, which is clinically used for the bonding of
dentin and enamel. Suitable for bonding resin materials and ceramic materials.
Scope of
application：
Used for bonding
dentine and enamel with resin and ceramic materials.
Clinical operation
steps:
1. Pretreatment of caries and pulp
protection.
2. Use 37% phosphoric acid etchant for
treatment, then clean it thoroughly with water, and dry it thoroughly with an
oil-free air gun.
3. Apply a layer of adhesive evenly on the
tooth surface with a small brush.
4. Make the adhesive layer even as far as
possible with the wind power of the air gun.
5. Irradiate with an oral light curing light
source of 300mW/c㎡ for 20 seconds to cure the adhesive.
6. Please use the composite resin filling
material according to the original manufacturer's instructions, as well as the
subsequent grinding and reconstruction processes.
Precautions：
1. During clinical
use, the lip and adjacent teeth should be well isolated and protected. Avoid
contact with eyes, mucous membranes and skin.
2. Phenols, clove
oil and zinc oxide can not be used as the bottom material of the first
layer,because clove oil contains polymerization inhibitor "phenolic
substances", which will directly affect the degree of polymerization of
the adhesive.
3. During the
curing operation, the distance between the surface of the light curing lamp and
the adhesive should be kept below 2mm, but it should not be in contact with the
material.
4. Before applying
adhesives and composite resin fillings, the tooth treatment surface should
avoid contamination by water and other impurities.
5. It is not
suitable for pulp capping, and patients who are allergic to resin should not
use it.
Environment：
This product is
operated at room temperature.
Storage Conditions：
This product
should be stored in a cool and dry place at 2°C~28°C, avoiding direct sunlight.
Shelf Life：
This product is
valid for 2 years, please do not use expired product.
Contraindications:
Patients with a
history of allergy to methacrylate resins are contraindicated.
|
