eBay

Why purchase a recycled keyless entry remote transmitter?

The vehicle keyless remote key fob you are going to purchase from us is pre-owned; aka: used, previously loved ;). We recycle OEM and aftermarket keyfobs and put them through a concise refurbishing process so we can guarantee our products are delivered to you in a ready-to-program state. We offer these car clickers at a significant cost savings to stealerships so you can keep your hard earned cash for something more fun while lightening your ecological footprint J. We call that a win-win! Why wait? Add some convenience to your daily routine and help save the environment, order your recycled car remote control today!

What are you purchasing?

This is ONE (1) Factory OEM (Original Equipment Manufacturer) keyless entry remote, aka "key fob" that will work with your OEM Factory installed RKE system.

Compatibility: Works with vehicles that use a factory keyless entry system listed in our compatibility section above AND below.

FCC ID#(s)	L2C0007T
Alternate Spellings	FCC ID L2C0007T L2C-0007T, L2C 0007T, L2C0007T, L2COOO7T Delphi Electronics & Safety Car Security TX 0007T
Part #(s)	9364556-4575, 93645564575, 10335582-88, 1033558288, 10335582, 10335588 Part Number on back: 9364556-4575 or 10335582-88 Canada: 34321021779 Current Part Number: 10335582 (all except Aztek) or 10335588 (only Aztek)
Compatible Vehicles FOR THIS FCC ID / PART #	2001 2002 2003 2004 2005 Buick Century sedan limited 2001 2002 2003 2004 Buick Regal CX CXL base ultra SUV 2002 2003 2004 2005 2006 2007 Buick Rendevous CX CXL base ultra SUV 2001 2002 Oldsmobile Intrigue sedan 2001 2002 2003 2004 2005 Pontiac Aztek base, rally edition SUV 2001 2002 2003 2004 Pontiac Grand Prix SE GT GTP coupe sedan EXT
Button Count	4 Buttons: (Lock, Unlock, Trunk or REAR, Panic) Same circuit board on remotes with Trunk button or REAR button – work the same for your trunk or your hatch
Battery (installed)	1; CR2032
Frequency	315 MHz
Programming: Please note not all customers will be able to complete the programming on their own so if you are having trouble or unsure diagnostic programming is available at your local qualified automotive locksmith or car/audio shop.	Pontiac Aztek “O” OPTIONAL RKE REMTOE KEYLESS ENTRY SYSTEM: DEPENDS ON TRIM LEVEL AND PACKAGE INSTALLED AT MANUFACTURE PROGRAMMING INSTRUCTIONS 1. Close all doors. 2. Press and hold the Unlock button on door lock switch on drivers door. Hold until instructed to release. 3. Insert and remove key from ignition 2 times. Do Not turn ignition. 4. Insert key in ignition a third time and leave key in ignition. Do Not turn ignition. 5. Release door lock switch on drivers door panel. A Chime will sound 3 times indicating that you are in programming mode. 6. Press both the Lock and Unlock buttons on the remote up to 30 seconds. A chime will sound 2 times if remote has programmed successful. 7. Repeat step 6 if you are programming additional remotes. 8. Remove key from ignition to exit programming mode ……………….. Buick Rendevous “S” STANDARD EQUIPMENT RKE REMTOE KEYLESS ENTRY SYSTEM INSTALLED AT MANUFACTURE BUICK Rendezvous 1. Close all doors. 2. Press and hold the Unlock button on door lock switch on drivers door. Hold until instructed to release. 3. Insert and remove key from ignition 2 times. Do Not turn ignition. 4. Insert key in ignition a third time and leave key in ignition. Do Not turn ignition. 5. Release door lock switch on drivers door panel. A Chime will sound 3 times indicating that you are in programming mode. 6. Press both the Lock and Unlock buttons on the remote up to 30 seconds. A chime will sound 2 times if remote has programmed successful. 7. Repeat step 6 if you are programming additional remotes. 8. Remove key from ignition to exit programming mode
Condition Notes	Pre-Owned; ready to be programmed to your vehicle’s compatible factory installed RKE system. You will receive (1) of the following remotes either with a TRUNK or a REAR. 1 loop is broken - the other loop is intact and will hold your key ring securely!

Installed RKE System Type:

Please be sure you have a FACTORY (RKE) remote keyless entry system. It was not standard on all vehicles. If your current remote looks the same then this will work. Other options include: Dealer Installed or Aftermarket. The system installed in your vehicle will CHANGE the required remote. If you are unsure ask your local dealer they will need your VIN # (Vehicle Identification Number (located on our vehicle registration car, on your driver side door jam, or your windshield (lower left drives side))).

Why does your vehicles installed RKE / Security system determine which remote control your can purchase?

The remotes job is to pair with your vehicles installed RKE system. It will only sync to a matching system; therefore, you cannot purchase a different type of remote than the remote manufactured with the system. It will not pair with a foreign system.

Programming:

We will send you information on how to locate programming requirement/instructions for your make, model, and year vehicle. Some vehicles have DIY (do-it-yourself) programming instructions available. While other vehicles require diagnostic programming which is available at your local qualified automotive locksmith or dealer.

Programming Requirement Information NOTE:

The vehicle manufacturers determine the programming requirements at the time of manufacture. We pass the programming requirements / instructions on to you as a courtesy. We do not write the programming nor do we determine which vehicles require diagnostic programming and which vehicles can be programmed by the you (DIY). We are not locksmiths nor mechanics nor are we familiar with EVERY vehicles program sequence. If you have questions:

1. Check your Vehicle Owners Manual for OEM Factory remotes or The User Manual for Dealer Installed or Aftermarket RKE systems.

2. YouTube has many video postings from do-it-yourselfers to assist with all kinds of questions & most customers find if very helpful to WATCH the programming being done which can eliminate mistakes in the sequence.

To locate the programming for your vehicle via this method go to YouTube and once there in the search bar type in the following:

i. If you have a factory RKE system: your make model year + the words program remote (i.e.: 2005 Ford Mustang program remote)

ii. If you have a dealer installed or aftermarket RKE system: the FCC ID or system type + the words program remote (i.e.: ELVAT5C program remote or AS200 program transmitter?)

3. For OEM FACTORY installed systems: send us an eBay message with your vehicles make, model & year = we can pass on to you any programming information requirements we have on hand.

4. For DEALER INSTALLED RKE installed systems: send us an eBay message with your remote controls FCC ID # and PART# and the vehicles make, model, & year = we can pass on to you any programming information requirements we have on hand (the programming for dealer installed RKE systems will be different than Factory or Aftermarket installed RKE systems).

5. For AFTERMARKET INSTALLED RKE installed systems: send us an eBay message with your remote controls FCC ID # and PART# = we can pass on to you any programming information requirements we have on hand (the programming for aftermarket installed RKE systems will be different than Factory or Dealer installed RKE systems).

6. There are also many auto forums that you can go onto by just conducting a google search with your questions.

7. or a local automotive locksmith or your local parts/car/audio store will typically be able to assist you if you are trying to avoid the dealer.