220-240 Volt unit   NEW 220-240 Volt Amana/Whirlpool icemaker. Comes with what is *pictured (without container box and ruler)!  Been doing this for 30+ years so if you need help, please ask and ask first!. An ounce of prevention is worth a pound of cure!

Shipping box's ID of content label is pictured (IC514 / P1328015W).  icemaker unit is complete with front cover, Power cord (part #12975112) has two fusible links, wire cutoff arm, Amana style "O" fill cup, FSP module #W10190972 / 230 Volt = (220-240).  Power cord end is 4-in-line sleeved male metal pins. Units underside has aluminum cover/guard.


Only a GENUINE OEM product as this is ensures quality!

ALL U.S. territories and Alaska must inquire for shipping prices!

  • I sell ONLY to lower 48 states at these shipping prices = Shipping via FedEx (Home or Ground) is being offered for $24.00,  and USPS priority for $28.00, OR USPS Ground Advantage for $18.00.    FEDEX  packages CANNOT ship to PO boxes (ONLY USPS packages are allowed in P.O. Boxes) therefore you MUST provide physical address if you choose FEDEX.  
  • Most  people  choose  the  less  expensive  carrier.  NOTE: Sometimes  i  upgrade  a  carrier postage  label  if  it  will  get  there  faster  and  cost  no  more  than  what  you  selected   HOWEVER  If  you select  fedex  ground/home  and  it  has  to  be  FEDEX  because  of  a  USPS  "NO  deliver  to"  address  situation,  then  let  me  know  it " HAS TO  BE  FEDEX  FOR  CERTAIN"   at  time  of  purchase  then  NO  CHANGES  will  be  made  on  my end.  i  have  only  run  into  this situation a couple of  times.

  • GREAT TIP AND HAVE A NICE DAY!   Having trouble with enough ice production?  try these tips >>>> #1 you must get a full fill each cycle; if you have a 7 or 8 cube icemaker tray they all must be full; most icemakers will harvest about every 1.5 to 2 hours per cycle (you must keep refrigerator doors closed because FREEZER temperature of 0ºF to + 8ºF is CRITICAL to ice production.  #2  nearly all domestic icemakers in refrigerators require a MINIMUM of 30psi water supply for proper flow AND to get a positive shut-off (an internally leaking Wv  although slow will/can cause freezing of the fill tube nozzle and once this happens then ALL ice production stops until it is manually thawed/cleared = it will NOT clear itself (40 to 65 psi is MUCH better). #3 check ALL incoming water filters both external (supply water lines leading to refrigerator AND internally within the refrigerator). A WORD ABOUT RO SYSTEMS = Reverse Osmosis:  Here is a little known fact, since RO systems operate on a pressure differential they inheriently deliver only approx 2/3rds of the supplied house pressure so, for an example if you have 60psi incoming then the best you can expect is 40psi coming out and that is when the unit is new and all filters are in top operational mode (clean) and it goes DOWN from there! I do not believe you can get a better quality of water purity than an RO system and I have one in my home BUT know this * they require maintainence and they offer a reduction in their outgoing pressure which in some cases can negatively affect certain products.  It is NOT recommended to use BOTH an RO system + any other filter be it internal or external on an icemaker installation. IF both are used together it can offer such HIGH RESISTANCE to the flow of water it can cause a multitude of problems for an icemaker = it can cause cubes to be too small and this (because of their reduced size) could cause the cubes to try to re-enter the mold (where cubes are formed and cannot jump the stripper to be delivered into ice bucket/container ) due to a lack of water flow which then in turn cause the cubes to get hung up upon trying to re-enter and sometimes even breaking the stripper bar. Once they get hung up there all ice production stops until you manually chip the cubes and are clear once again for the unit to cycle.  ***  If you have 40 psi incoming water pressure to your house then the RO sys will be limited to about 26 to 28 psi output which is BELOW the minimum requirement of most water valve manufacturers for proper operation and longevity.

I have lots of parts for icemakers, many good used and a wide selection so if in need ask a question; you can send several pics per message thru ebay just click on "attach photos" (to copy and paste) before sending!