110 220V Pro W3002 Digital Temperature LED Thermostat Regulator Switch Tester

 

Description: 

Temperature measurement range: - 50 ~ 110°C

Temperature control range: - 50 ~ 110°C

Temperature measuring accuracy: +- 0.2 °C

Temperature control precision: +- 0.1 °C

Measuring input: NTC10K L = 1 meters waterproof probe

Input power: according to the classification of choice

Output power: according to the classification of choice

Appearance size: 60 * 45 * 31 mm 

This Temperature Controller come with 1meter waterproof sensor 

This item sensor use 2P plug, very easy to change, you also can choose more long sensor

 

Features: 

Heating/refrigeration modes, users can set the start/stop temperature freely; With large and clear LED display for better readability

Easy to use: Three buttons for easy operation, to set start temperature, stop temperature, corrected temperature, delay start time.

 

Two Work Mode: Heating ( start temperature is less than stop temperature), Cooling ( start temperature is above than stop temperature)

Application: Waterproof sensor, can be used to detect water or other liquid non-corrosive. objects temperature, for aquaculture, ornamental fish and other

 

Operation Instructions:

Set the start temperature; press the up button on one time to show the starting temperature, press the upper key for about 3 seconds, 

start temperature and digital flicker, and set the required temperature value through the upper and lower keys.

Set the stop temperature: press the next button to show the stop temperature, press the key for about 3 seconds, stop the temperature, and digitally flicker, 

and check the required temperature value through the upper and lower keys.

Restore factory setting: under the condition of electricity, at the same time

hold down the upper and lower keys, the digital tube display 888 then automatically jump to the detection temperature, can restore the factory 

setting;

Start temperature < stop temperature = heating mode

Start temperature > stop temperature = refrigeration mode

 

Prompt: 

When setting up the heating mode, if the temperature value is set upside down, the output indicator will not be lighted and the load will not work.

If the above situation occurs after the completion of the setup, we can check whether the temperature value of the set is reversed.

 

Package Includes: 

1 x Digital Temperature Controller Thermostat

1 x NTC Thermistor Temperature Sensor Waterproof Probe Cable