🛡 Liquid Rubber DIY - Sealer/Primer

Designed as part of the Roof Restoration System, Liquid Rubber DIY - Sealer/Primer primes coated surfaces and improves adhesion for our Thermal Coating. Correct application ensures maximum coverage, delivering a durable, long-lasting finish.

✅ Features & Benefits

• ✔ Seals painted surfaces
• ✔ Promotes adhesion of our Thermal Coating
• ✔ 100% acrylic primer
• ✔ Excellent coverage
• ✔ Easy application & quick clean-up
• ✔ Proudly Australian Made & Owned

🏗 Suitable For

• ✔ On top of our Waterproof Sealant
• ✔ Concrete & Render
• ✔ Terracotta Tiles
• ✔ Zincalume Sheets
• ✔ Insulated Panels
• ✔ (Repeated) Insulated Panels

🛠 How to Apply

• ✔ Allow any Waterproof Sealant to cure at least 24 hours before applying this Sealer.
• ✔ Disconnect downpipes prior to application; keep them disconnected until rinsing by water or heavy rain.
• ✔ Wash the surface thoroughly with water and let it dry. Remove any oils, minerals, or loose material.
• DO NOT USE IF RAIN IS IMMINENT.
• ✔ Stir thoroughly before use. Apply by brush, roller, or airless spray to the painted surface.
• ✔ One coat at 100–200 microns is generally sufficient, provided complete coverage is achieved.
• ✔ Primer is typically ready for top coating after 2–4 hours at 25°C (allow more time in cooler conditions).
• ✔ Use in a well-ventilated area; do not immerse.

📏 Coverage – How Much Product Do I Need?

Rate: 8m²/L

• 15L Bucket
  120m²
• 4L Bucket
  32m²
• 1L Bucket
  8m²

One coat is sufficient for most conditions.

🧹 Clean-Up

Use water while the product is still wet. If the product has dried, solvents may be required.

📦 Storage

Store in a cool, dry place, away from children. This is a non-flammable liquid and poses no special handling or transport risks.