Specialized Enduro Carbon Expert S4 (Large).
Bought new in 2023 and hardly used (approx. 5 times) as I’ve done more gravel riding due to a knee injury on my other bike.
The Enduro is a highly capable bike but still pedals well for bigger days.
The bike is std apart from the up graded factory shock.
I also had the bike fully checked by Infinity Cycles and it’s only been ridden a twice since.
The bike is still super fresh and feels like it! It’s super low use due to my knee.
From new the Enduro was covered in 3m clear plastic and a invisiframe kit for the forks (both still fitted).
The bike is also set up tubeless.
Any questions please feel free to get in touch. (Pedals not included).
Please contact me about payment, postage or possible meeting half way etc.

May be interested in Part ex for a 2 stroke MX bike.
Thanks for looking.
Full spec below and Geometry below;
Specification
Frame FACT 11m carbon chassis and rear-end, S-Sizing Enduro Race Geometry, SWAT™ Door integration, threaded BB, internal cable routing, 12x148mm dropouts, sealed cartridge bearing pivots, replaceable derailleur hanger, 170mm of travel
Rear Shock FOX FLOAT X2 Factory, Rx Trail Tune, 2-position adjustment, low speed rebound and high & low speed compression adjust, Trunnion mount, 205x60mm
Fork FOX FLOAT 38 Performance Elite, GRIP2 damper, 15x110mm, 44mm offset, 170mm of travel
Stem Alloy Trail Stem, 35mm bar bore
Saddle Bridge Comp, Hollow Cr-mo rails, 155/143mm
Grips Deity, Knuckleduster, Black
Handlebars Specialized Trail, 7050 alloy, 8-degree backsweep, 6-degree upsweep, 30mm rise, 800mm, 35mm clamp
Front Brake SRAM Code RS, 4-piston caliper, hydraulic disc, 220mm
Rear Brake SRAM Code RS, 4-piston caliper, hydraulic disc, 200mm
Shift Levers SRAM X01 Eagle, trigger, 12-speed
Rear Derailleur Sram X01 Eagle, 12-speed
Cassette SRAM XG-1295 Eagle, 10-52t
Chain SRAM GX Eagle, 12-speed
Crankset SRAM Descendant 7K, DUB, 170mm
Chainrings 30T
Bottom Bracket SRAM DUB, BSA 73mm, threaded
Rims Roval Traverse 29 Alloy, 30mm inner width, hand-built, 2Bliss Ready
Front Hub Roval, sealed cartridge bearings, 15x110mm spacing, 28h
Rear Hub Roval DT Swiss 370, Ratchet LN, SRAM XD driver body, 12mm thru-axle, 148mm spacing, 28h
Spokes DT Swiss Competition Race
Front Tire Butcher, GRID TRAIL casing, GRIPTON® T9 compound, 2Bliss Ready, 29x2.3""
Rear Tire Eliminator, GRID TRAIL casing, GRIPTON® T7 compound, 29x2.3""
Inner Tubes Standard, Presta valve
SeatPost OneUp, Dropper Post-V2, MMX lever, 34.9 (S2:150mm, S3/S4:180mm, S5: 210mm)
Seat Binder Alloy, 38.6mm
Crank Length 170mm
Handlebar Width 800mm
Stem Length 50mm
Saddle Width 143mm
Seatpost Length 180mm
Stack (low BB) 629mm
Reach (low BB) 487mm
Head-Tube Length 110mm
Head-Tube Angle (low BB) 63.9°
Head-Tube Angle 64.3°
B-B Height (low BB) 347mm
B-B Height 354mm
B-B Drop (low BB) 28mm
B-B Drop 21mm
Trail (low BB) 132mm
Fork Length (full) 581mm
Fork Rake/Offset 46mm
Front-Center (low BB) 777mm
Chain-Stay Length 442mm
Wheelbase 1274mm
Seat-Tube Length 440mm
Seat-Tube Angle 76°