Door entry monitor description 1. 2. 3. 5. 4. 6. 7. 8. 10. 11. 9. L L CFP1 CFP2 1. Brightness control f To increase the value, turn clockwise 2. Colour intensity adjustment f To increase the value, turn clockwise 3. 4.3" colour LCD screen 4. Call volume adjustment (High / Medium / Low) 5. Buttons 6. Handset f Lift the handset to start communication Do not press and hold the audio hook while the handset is lifted 7. S1 microswitches for programming the user code (see paragraph “Addressing table”) 8. S2 microswitches for button and function programming (marked with a red corner) DIP 1-2-3-4 for button function programming DIP 5-6 access to programming DIP 7 for power supply voltage management (default ON) S2 DIP 7 must always be set to ON, even in systems with 4888C and 4888CU (as in the factory settings) DIP 8 for setting main and secondary door entry monitor (see paragraph “Main and secondary door entry monitors”) 9. Loudspeaker volume adjustment (for setting intercom audio only) 10. CV5 jumper for video closure In systems with more than one door entry monitor connected in cascade, only the door entry monitor furthest away must have CV5 closed 11. Pin for securing terminal block Terminal block for system connection: LL Bus line connection terminals CFP1 CFP2 Floor door call input Wall-mounted door entry monitor with 4.3” / 16:9 colour screen and handset. Allows brightness and colour control, plus adjustment of the ringtone volume, which can be customised by choosing one of several different melodies. Equipped as standard with 4 soft touch buttons (8 with 6701W/8) for controlling lock-release, self activation, switchboard call and Privacy function, as well as door status indicator LEDs. Manages floor door calls as standard. Complete with 2 x 8-position dipswitches for programming the user code and button programming. The backplate for wall installation or domestic series box installation and the distribution terminal from riser art. 1214/2C are included. The door entry monitor can only be used in 2-wire Simplebus2 systems. Dimensions (L x H x D): 175x160x22 mm. Option of adding 4 additional buttons to Art. 6701W-6701W/BM with accessory Art. 6733W. Item 6701W/BM is not supplied with backplate 6710.