

Size:
Direct serial output operation:
1.RDM6300 reader module wiring as follows: 5v power supply
2.arduino development board programmer empty program can:
void setup () {}
void loop () {}
3. Serial assistant or arduino IDE port reader output data:
Output format hexadecimal start frame + ID code + verification code + stop frame, such as a digital ID Tag is on 0008565187, output as
the following figure Conversion between hexadecimal
TTL Interface RS232 Data output format
1.9600bps,N,8,1 2.CHECKSUM: card 10byte DATA entire do XOR operation
Example: card number: 62E3086CED Output data:36H、32H、45H、33H、30H、38H、36H、43H、45H、44H
CHECKSUM: (62H) XOR (E3H) XOR (08H) XOR (6CH) XOR (EDH)=08H | 2. Time sequence chart
|
RDM630 series of non-contact radio frequency ID card specific modules, preclude the use of advanced radio frequency receiver circuits and embedded microcontroller design, combined with efficient decoding algorithms, complete data for EM4100 compatible ID cards accepted.
It has a high receiver sensitivity current or works cubicle, high stability.
It is suitable for access control \ attendance \ charge \ security \ Patrol System and other applications.
Package: