• Multi protocol read and write M1, 15693, Ntag21x tags
• MODBUS protocol directly connected to PLC, supporting simple and composite instructions
• Modbus RTU, serial protocol (RS232/485)
• Modbus TCP, TCP/IP protocol (RJ45)
• Support active uploading of any data within the configuration card
• Support initializing and writing label data
• 304 stainless steel body, TCP network port version supports POE power supply
• Built in red and green LED indicator lights and buzzer
• The baud rate for data transmission can be freely set
• Supports cascading reading of RS485 readers and writers, with free address configuration
• Supports TCP readers and writers to freely configure IP addresses, enabling multi device networking
• Support readers to set internal upload keys
• Optional data reporting and deduplication function
• Provide convenient C # testing application software and instruction set development documentation
• Convenient secondary development

 

• Product models: XZ803, YZ903
• Output power:<400mW
• Card reading distance: 0-90mm
• Communication protocols: serial port, TCP/IP, Modbus
• Communication interface: RS485, RS232, TCP
• Working frequency: 13.56MHz
• Working voltage: 7.5-36V
• Working mode: automatic, master-slave command
• Work protocol: ISO15693/ISO14443A
• Protection level: IP67
• Work tips: Red and green LEDs, buzzer
• Working temperature: -20 ℃~70 ℃
• Working humidity: -10% RH~95% RH (non condensing)
• Material: 304 stainless steel
• Product size: M30x97mm