Application

Perfectly Fit for Sta-Rite Max-E-Glas II, Dura-Glas II series up-rate and full rate pool/spa inground pumps. Fit for Dyna-Glas, Dyna-Max Series, Dyna-Pro, Dyna-Pro E pool and spa pumps. Also compatible with Dyna-Wave series pool pump


Stop Leaks

After years of use, the old cover would be warped and not sealing properly, causing leaking problems on your pump. Simply replace the old lid with ours to figure out the problem and enhance the performance of your pump.


Installation

This package does NOT include O-Ring or gaskets, and you need to reuse the O-ring from your existing cap. 

1) Unscrew the old trap lid by turning counterclockwise. 

2) Remove the rubber gasket from the old lid and install on the new one. 

3) Hand tighten the new lid to the pump. Note: Remember to stop pump, close valves in suction and discharge, and release all pressure from system before replacement.


High Light Transmittance

Due to years of sun damage, the old lid may not be clear enough to see the water condition in the pump. Our new clear transparent lid can be directly replaced for the original lid and allows you to view the water more conveniently without lifting the lid.


Material

Made of premium quality acrylic plastic with high light transmittance and good sealing. Carefully manufactured to ensure long term use, not easy to break.








Payment

√ We accept Payoneer/Paypal/Google Pay/Visa/Master Card/Amex/Discover for Payment.

Shipping

√ Items will be shipped within 1 business day when we received payment.

√ We only ship to confirmed ebay addresses. Your ebay address MUST MATCH your Shipping address.

√ All of the items are shipped from our Warehouse in USA,Ship via USPS or UPS.It usually takes about 2-5 business days to reach you.


Terms of Sales

√ We accept 60 days return guarantee for all Items If you are unsatisfied with something you bought from us, you may send it back within 60 days of receipt, and we shall be happy to exchange or refund.

√ Leave a message note in returned box quoting your item(s) ID and buyer ID.

√ All returned products must be in their original condition and packaging. Unfortunately, if products have been assembled or modified, we cannot take them as returns.

√ It is important that we know when your return is expected. Please save your return tracking number or post receipt, and email it to us. We need this in case there are any issues during transit.

√ Refund will only be issued upon our receipt of the returned parcel. Please allow 2 working days for us to process with your return


Contact Us

√ Any Questions,Just feel free to contact us on eBay.We will reply you in 1 business day.

Application

Perfectly Fit for Sta-Rite Max-E-Glas II, Dura-Glas II series up-rate and full rate pool/spa inground pumps. Fit for Dyna-Glas, Dyna-Max Series, Dyna-Pro, Dyna-Pro E pool and spa pumps. Also compatible with Dyna-Wave series pool pump


Stop Leaks

After years of use, the old cover would be warped and not sealing properly, causing leaking problems on your pump. Simply replace the old lid with ours to figure out the problem and enhance the performance of your pump.


Installation

This package does NOT include O-Ring or gaskets, and you need to reuse the O-ring from your existing cap. 

1) Unscrew the old trap lid by turning counterclockwise. 

2) Remove the rubber gasket from the old lid and install on the new one. 

3) Hand tighten the new lid to the pump. Note: Remember to stop pump, close valves in suction and discharge, and release all pressure from system before replacement.


High Light Transmittance

Due to years of sun damage, the old lid may not be clear enough to see the water condition in the pump. Our new clear transparent lid can be directly replaced for the original lid and allows you to view the water more conveniently without lifting the lid.


Material

Made of premium quality acrylic plastic with high light transmittance and good sealing. Carefully manufactured to ensure long term use, not easy to break.