Properties :
This special cleaner is nearly odourless and highly
economic. Lithofin MN Power-Clean removes grease
and oil, all kinds of general and ingrained dirt as well
as floor polish residues, old acrylic emulsions, care
products, etc.
Field of Use :
For thoroughly cleaning used or exceptionally dirty
natural stone surfaces and for initially cleaning newly
laid surfaces. Suitable for use on polished, finely
honed and rough marble and other natural stones.
Facilitates removing cement residues from polished
marble. Suitable for indoor and outdoor use.
Directions for Use :
Apply and evenly distribute Lithofin MN Power-Clean
diluted up to 1:10 and wipe the surface. In case of
stubborn dirt deposits, apply undiluted or diluted up to
1:5 with a brush and distribute. Allow the product to
work for 10 to 20 minutes; brush occasionally. Do not
allow to dry, add water if necessary. Brush again
before wiping up. On large areas, use a squeegee to
remove the product. Wash the surface thoroughly with
clean water. If the result is not satisfying, repeat the
process allowing the product to work longer and
brushing more vigorously
Please Note: avoid splashes on sensitive areas such
as metal or wood, painted or varnished surfaces,
wall paper, etc. Always test the product in an
inconspicuous area prior to use.
Coverage:
as supplied: approx. 5 to 10m² depending on dirt
diluted: up to 30m²
Advice: for removing wax layers and the like,
we recommend Lithofin WAX-OFF. For cement residues and rust discolorations on
granite, gneiss and similar acid resistant stones, use
Lithofin MN Builders’ Clean.
Technical Data:
Density: approx. 1.0 g/cm³
pH-Value: approx. 10
Appearance: liquid, colourless, clear
Odour: pleasant
Flash Point: n.a.
Solubility in Water: complete
Storage:
Keep closed, cool and dry. Not above 25°C.
Shelf life of up to 3 years.
Safety:
Please refer to material safety data sheet.