The Fenix CL26R Pro features White and Red LEDs with a 650 Max lumen output and uses 1 x 21700 rechargeable battery (included)
Fenix CL26R Pro is an ultra compact, go anywhere professional quality lantern that offers performance far exceeding its size. CL26R Pro is built to the highest industry standards and features multiple lighting elements including forward only lighting, 360 degree lighting, down lighting and red / red flash.
Powered by a high capacity, replaceable Fenix 5000mAh 21700 battery, excellent run times are guaranteed. The battery is recharged via a built-in USB-C socket (cable supplied) and CL26R Pro also features a USB-A discharge socket for use as a convenient power bank.
Operation is via a rotary switch and electronic push button combination for simple selection of the multiple lighting modes.
The lantern can be used free standing, magnetically attached or via the built-in retractable hanging hook. Fully rain and splash resistant to IP66, no outdoor job is too tough for Fenix CL26R Pro.
Fenix CL26R Pro performance:
Forward lighting: (Great for reading).
360 degree lighting: (All around illumination to light the whole area).
Down lighting: (Great spread of light from the bottom of the lantern. Also works as a close range torch).
Combined lighting: (Maximum power with 360 degree and down lighting combined).
Red light: (Preserve night vision or use as an emergency beacon).
Fenix CL26R Pro features:
Fenix CL26R Pro operation:
On/off
With the lantern switched off, rotate the toggle switch to any output to turn on the lantern or press and hold the button to turn on the lantern in red light mode.
With the lantern switched on, rotate the toggle switch to turn off the lantern or press and hold the button to turn off red light mode.
Mode switching:
With the lantern switched off, rotate the toggle switch clockwise to turn on the lantern and enter 360 degree light mode.
With the lantern switched off, rotate the toggle switch counterclockwise to turn on the lantern and enter Down light mode
With the lantern switched off, press and hold the button for 0.5 seconds to enter the Red light mode. Press and hold the button again for 0.5 seconds to turn off the red light mode
Output Selection:
360 degree mode:
Rotate the toggle switch clockwise to select Front→Low→Med→High.
Down Light mode:
Rotate the toggle switch counterclockwise to select Down 1→Down 2→Down 3.
Combined lighting mode:
In 360 degree lighting or down lighting mode, press and hold the button for 0.5 seconds to switch on both modes simultaneously. Press and hold the button again for 0.5 seconds to return to the original mode.
Changing combined light settings:
In 360 degree lighting mode, simultaneously enter down lighting mode by pressing the button for 0.5 seconds and then single click to cycle through Down 1→Down 2→Down 3 (360 degree output remains the same).
In Down lighting mode, simultaneously enter 360 degree lighting mode by pressing the button for 0.5 seconds and single click the button to cycle through Front→ Low→Med→High (Down lighting output remains the same).
Red light mode
Single click the switch to select between Red light and Red flash.
SPECIFICATIONS
BATTERY TYPE: 21700
BATTERY QUANTITY: 1
ADDITIONAL BATTERY TYPE: 18650 can be used in combination with Fenix ALF-18 battery adaptor (sold separately)
LED TYPE: 7 sets of COB light board and a Redslight SC1818C cold white LED
OUTPUT/RUNTIME: High: 500 Lumens (10 hrs), Med: 200 Lumens (13 hrs), Low: 50 Lumens (40 hrs)
Front: 25 Lumens (67 hrs), Down I: 5 Lumens (408 hrs), Down II: 50 Lumens (58 hrs), Down III: 150 Lumens (15 hrs)
Red light: 3 Lumens (125 hrs), Red flash: 3 Lumens (240 hrs)
FLASHING MODES: Red, Red Flash
MAX BEAM DISTANCE: 15m Diameter
REFLECTOR: N/A
LENS TYPE: N/A
SWITCH TYPE: Rotary switch and electronic push button switch
CONSTRUCTION : Quality plastics
TAIL STAND: Yes
POCKET CLIP: Hanging Clip
WATERPROOFING: IP66, weatherproof and dustproof
DIMENSIONS: 66mm (Depth incl switch) × 59.5mm (Width) × 114 mm (Height)
WEIGHT: 199 grams (excluding battery)