Winding machine FY-730 740 winding machine computer programmable set the number of winding circle speed adjustment
Model: FY-730 (can set the number of laps can set the number of groups can adjust the speed 0-99999 laps) Model: FY-740 (can set the number of laps, can set the number of groups, can adjust the speed 0-9999.9 laps)
It adopts motor drive, manual wire arranging, electronic counting and automatic stopping. It can be used to wind all kinds of small wires.
All models of this series can be equipped with DC servo machine. The winding diameter can be increased appropriately compared with AC motor, and stepless speed regulation can be realized.
All the wire machines of this series are left out of the shaft, can also be customized right out of the shaft, and can be customized according to the user's requirements of the rotational speed.
Technical Parameters
-Coil diameter: 120mm
-Coil width: 100mm
-Winding diameter: 0.03-0.8mm
-Counting range: 0-99999 turns (FY-730)
-Spindle speed: 1150rpm; 1600rpm
-Can be stepless speed regulation
-Counting: 0-9999.9 laps (FY-740)
Product use instructions
FY-730, 740 type computer programmed speed regulation winding machine
This machine is an ideal computer programming can be arbitrarily set 1-10 sections of the winding turns, for the control of the operation of the line equipment, in the same skeleton can be continuously wound on the silk 1-10 groups of different turns of the coil, the machine adopts advanced computer technology, through the keyboard input winding and the number of turns of the line to be wound, the winding and the number of turns of the winding is automatically displayed, winding to the preset number of turns will automatically stop. When the machine reaches the preset number of turns, it will stop and brake automatically. The machine is characterized by novel design, stable performance, easy operation, high efficiency, accurate counting, clear display, data protection against power failure, stepless speed regulation and reversible counting. This machine is suitable for telecommunication, electrical appliances, instrumentation industry, winding all kinds of inductor coils, instrument coils, disconnectors, timers, home appliances, low-voltage electrical appliances and all kinds of flat winding coils, especially suitable for small transformers, small micro-motor coils and other multi-winding coils.
I. Main technical data:
1, power supply voltage: 220V, 50HZ 6, can wind coil width: 120mm,
2、Motor: 220V, 300W, 2000rpm 7、Coil diameter: 100mm.
3、Winding spindle speed: A gear: high 1500: B gear: high 3000 rpm 8、Each winding can be set: 0-99999 turns
4, can be set winding 1-10 9, power outage protection data> 12 hours
5、Applicable wire diameter: 0.03-1.80mm
Second, installation:
1, the machine should be installed in a stronger wooden workbench, the workbench and the winding machine base plate should be padded like a leather fixed, easy to reduce the vibration of the winding machine, the winding machine base plate has 4 fixing holes for fixed installation.
2, should be installed on the spindle of the bobbin winder set shaft, and tighten the fixed studs, should be normal check the bobbin winder set shaft is not loose bending, the bobbin winding shaft should be kept concentric in operation.
Third, set the use of guidelines:
(1) How to set the winding set and the number of winding turns Tips: there is a beep sound after pressing the button response. Setting button supports long press.
1, set the number of turns of the winding (for example, set the winding '1' for 100 turns).
① First, press the zero button, and then long press the 'set' key, see the display Xi [0] [ ] (into the 'winding' setting items.)
② Press 1 on the keypad, see the display [1] [ ] (Select the winding to be set as '1'.)
③Press OK, see display [ ] [ 0 ] (Enter the setting item of the number of turns of this winding.)
④ Press 100 on the keypad, see display [ ] [ 100] (Set the number of turns of this winding as '100'.)
⑤ Press “OK” on the keypad to see the display [ 1 ] [ 100 ] (indicating that the number of turns of winding '1' is set to '100'. The first winding is set.)
2, according to the above ① ② ③ ④ ⑤ method can be set continuously 1-10 winding turns, as well as repeat to change the number of turns set (repeat to set the number of turns of the original set are automatically disappeared).
3、Winding turns setting is completed, press the 'View' button to view the set number of winding turns is correct, or first press the 'Zero' button and then press the keypad on the 1-9 keys to find out, if there is a difference between the winding turns to reset the number of winding turns ( Every time you press the view button, blink three times to view a set number of winding turns, you can cycle through the view).