Engine/transmission -

SILKOLENE COMP 4 SAE 10W-40 XP

Ultra High Performance ester-based 4-stroke engine oils for high-performance motorcycles.

Description

SILKOLENE COMP 4 SAE 10W-40 XP is a 4-stroke motorcycle engine oil based on XP Technology. SILKOLENE COMP 4 SAE 10W-40 XP is based on esters and other synthetic and mineral base oils with a high-performance motorcycle-specific additive system XP Technology uses an innovative, highly shear-resistant, low-volatility base oil formulation along with stable esters to achieve increased power, provide ultimate engine and transmission protection, reduce oil consumption, and improve fuel economy. XP Technology combats engine wear and reduces friction on all critical surfaces both at high temperatures and during cold starts. SILKOLENE COMP 4 SAE 10W-40 XP uses a balanced formulation to ensure the proper operation of oilimmersed clutches and other driveline components.

Application

SILKOLENE COMP 4 SAE 10W-40 XP was formulated to meet the requirements of modern 4- stroke motorcycle engines. SILKOLENE COMP 4 SAE 10W-40 XP is suitable for both air- and liquidcooled engines and can be used in on- and off-road motorcycles. SILKOLENE COMP 4 XP range comes in four viscosity grades to provide the correct viscosity for the majority of motorcycle engines. SILKOLENE COMP 4 SAE 10W-40 XP is miscible and compatible with conventional, branded engine oils. However, mixing with other engine oils should be avoided in order to fully exhaust this product’s benefits. A complete oil drain is recommended when converting to SILKOLENE COMP 4 SAE 10W-40 XP. For information on product safety and proper disposal please refer to the latest Material Safety Data Sheet.

Advantages

? Specifically designed for 4-stroke engines fitted with wet clutches.

? Outstanding wet clutch performance as per JASO MA2 standard leading to smooth gear changes and maximum power transmission.

? A product range suitable for all high-performance 4- stroke motorcycle engines on and and off road.

? Improved fuel-economy potential and reduced oil consumption by XP Technology.

? Very good gear wear and pitting protection.

? Very good wear protection.

? Offers an effective protection against deposits, even at high temperatures, thus achieving a higher degree of engine cleanliness and an extended engine life.

? Provides a much better corrosion protection, a better oxidation/nitration resistance and a lower volatility than conventional products

Specifications

? -

Approvals

? JASO MA2

FUCHS Recommendations

? API SN

TYPICAL CHARACTERISTICS

Density at 15°C -- DIN 51757 -- 0.866 g/cm³

Kinematic Viscosity at 40°C -- DIN 51562-1 -- 103.6 mm²/s

Kinematic Viscosity at 100°C -- DIN 51562-1 -- 15.5 mm²/s

Viscosity Index DIN ISO 2909 -- 158

CCS Viscosity at -25°C -- ASTM D 5293 -- 5,704 mPas

Closed Flash Point -- ASTM D93 -- 212 °C

Pour Point -- DIN ISO 3016 -- -36 °C

Product Dyeing -- None