Zebra GX430t Direct or Thermal Transfer, WIFI, LAN or USB Label Printer with Ribbon, replacement power supply, USB and mains cables and Roll of 250 4x6" labels.
In good used working order, good print quality.
Please choose required option from drop down list.
LAN and WIFI options if connected to the router can be used from any PC on that network.
WIFI option WILL NOT print from Android phone. For that purpose you will need LINK OS WIFI printer like this:
https://www.ebay.co.uk/itm/326662451892
To print from iPhone or iPad you need Air Printer app installed and running on Bluetooth enabled computer to which printer is connected. Then you can print from Air Printer app installed on iPhone or iPad.
No Zebra Label printers are AirPrint enabled.
First of all please download and install ZDesigner driver from Zebra website. Then connect printer to PC via USB Cable and allow Windows to install it. Right click on printer in Control Panel- Options- set your label size and click Apply- Tools- Run Calibration-Send. Printer will be ready to work via USB cable.
To install as a network printer go to Control panel- Add printer-Network printer- Choose Printer isn't on a list- type in IP address from the label on side of printer- Device type-Print Server-Zebra-GX430t. Install, configure- Add label size, calibrate and you are ready to go.
To configure wireless printer please install and run Zebra Setup Utility- Configure Printer Connectivity- Wireless- Static-Hostname (give name to your printer)- IP Address –Subnet Mask –Default Gateway – Next page ESSID: type in your router name (Case sensitive)– Choose security mode of your router-Next-tick String in WPA Settings and type in your router password in PSK Name –Next-Finish. Settings will be sent to printer. It will reset and if everything gone well you should see network LED will lit green and printer will print configuration label.
If printer went into boot loop after sending WIFI Configuration- turn it off, press and keep Feed button until see on screen Print 1 of 1 and release it. It will print configuration label and Font list and will go into Dump Mode. Press Feed button once -it will feed label, then once more- it will print Out of Dump. If this won't happen go to printing Preferences- Tools- and Click- Exit Diagnostics Mode. After that IP address and Signal strength should appear on a screen. If not - repeat setting Static IP address.
Next step is to install WIFI printer in your PC. Zebra Setup Utilities- Install New Printer-Install Printer-Choose GX420d from the list- Next-Add new Printer- Add Port-give a name to printer-Type IP Address you assigned for printer- Port number will be assigned by computer-OK-Choose created port from the list-Finish. Printer driver will be installed and new printer icon will appear in Control panel.
If you have any issues installing or configuring it, please contact me and I will help to troubleshoot.
Some troubleshooting tips:
If printer installs but when you send print job - nothing happens:
Go to Control Panel - Devices & Printers - Right click on printer- choose Remove. Turn printer Off then On again. Wait until printer will install again, go to Printer Preferences- Options-set label size- Tools- Run Calibration and try to print delivery label again. Don't print Windows test print. If unsuccessful - repeat procedure until Windows install printer correctly or can try through Device Manager-Printers- Uninstall.
If printer prints empty labels.
First off all make sure that labels are loaded facing up.
Use labels supplied with printer. Some labels are designed for Thermal Transfer only- they work with ribbon only.
If printer is printing empty label after printing correct one- Run Calibration.
Any other problems- please contact me. My details in Business Details at the bottom of listing.