Properties :
Lithofin WAX-OFF dissolves organic dirt such as wax, oil, grease, tar, fresh paint, sealants, care product residues, etc. and allows them to be removed with water.
Field of Use :
For removing oily and greasy dirt deposits from solvent resistant surfaces such as natural and concrete stone, ceramics, clay and quarry tiles, concrete, etc. Suitable for indoor and outdoor use. Also suitable for removing elastic joints (silicone).
Directions for Use :
Apply Lithofin WAX-OFF undiluted to the dry surface and distribute evenly. Work in small controlled sections. Allow the product to work for 5 to 20 minutes, brushing occasionally. Do not allow to dry. When all deposits are dissolved, add some water, brush and remove the solution from the surface. On large surfaces use a squeegee or a wet and dry vac. Always rinse well with clear water. In case of stubborn deposits, repeat this procedure when the surface has dried.
Please Note: the surface temperature must not exceed 25°C. Switch off under floor heating. Solvent sensitive surfaces such as rubber, paint, varnish, linoleum, asphalt, some plastics, etc. must be protected against splashes. Always try the product in an inconspicuous area prior to use.
Advice: in case of deep oil stains on natural and artificial stone, we recommend Lithofin OIL-EX.
Coverage: approx. 7 to 15m² depending on type and stubbornness of the deposits.
Technical Data:
Density: approx. 0,85 g/cm³
pH-Value: n.a.
Appearance: liquid, clear
Odour: aromatic, orange-like
Flash Point: approx. 46°C
Solubility in Water: emulsifiable
Storage:
Keep cool, closed and dry.
Shelf life of up to 4 years.
Safety:
Please refers to Material Safety Data Sheet.