Zebra GK420d Direct Thermal Network or USB Label Printer with replacement power supply, USB and mains cables and Roll of 250 4x6" labels.
In good used working order, good print quality.
Please choose required option from drop down list.
LAN option if connected to the router it can be used from any PC on that network.
First of all please download and install ZDesigner driver from Zebra website. Then connect printer to PC via USB Cable and allow Windows to install it. Right click on printer in Control Panel- Options- set your label size and click Apply- Tools- Run Calibration-Send. Printer will be ready to work via USB cable.
To install as a network printer go to Control panel- Add printer-Network printer- Choose Printer isn't on a list- type in IP address from the label on side of printer- Device type-Print Server-Zebra-GK420d. Install, configure- Add label size, calibrate and you are ready to go.
If you have any issues installing or configuring it, please contact me and I will help to troubleshoot.
To print from iPhone or iPad you need Air Printer app installed and running on Bluetooth enabled computer to which printer is connected. Then you can print from Air Printer app installed on iPhone or iPad.
No Zebra Label printers are AirPrint enabled.
Some troubleshooting tips:
If printer installs but when you send print job - nothing happens:
Go to Control Panel - Devices & Printers - Right click on printer- choose Remove. Turn printer Off then On again. Wait until printer will install again, go to Printer Preferences- Options-set label size- Tools- Run Calibration and try to print delivery label again. Don't print Windows test print. If unsuccessful - repeat procedure until Windows install printer correctly or can try through Device Manager-Printers- Uninstall.
If printer prints empty labels.
First off all make sure that labels are loaded facing up.
Use labels supplied with printer. Some labels are designed for Thermal Transfer only- they work with ribbon only.
If printer is printing empty label after printing correct one- Run Calibration.
Any other problems- please contact me. My details in Business Details at the bottom of listing.