📄 Product Details:
1976–1995 Jeep Wrangler YJ / CJ Interior Carpet Kit – 6 Piece Set – Gray – Molded Rug Floor Mat Liner
Includes: 6-Piece Complete Interior Carpet Kit
Color: Light Gray (Grey)
Fitment: Jeep CJ-5, CJ-7, CJ-8 (Scrambler) & Wrangler YJ (1976–1995) – Full Steel Doors Only
Restore or upgrade your Jeep's interior with this premium 6-piece molded light gray carpet kit, specifically designed for 1976–1995 Jeep CJ and Wrangler YJ models. Custom-cut for a precise fit, this high-quality carpet set gives your Jeep a clean, fresh look while helping to reduce road noise and heat inside the cabin.
Features:
✅ 6-Piece Full Coverage – Includes floorboards, rear floor, and cargo area
✅ Light Gray Vinyl-Backed Carpet – Durable, fade-resistant, and easy to clean
✅ Molded for Jeep Tubs – Ensures a snug, custom fit
✅ Sound & Heat Insulation – Adds comfort to the ride
✅ Cut-to-Fit Design – No pre-cut holes; allows custom fitting around seats, shifters, etc.
✅ Simple Installation – Uses spray adhesive (not included); designed for DIY or professional install
✅ OEM-Style Appearance – Complements classic Jeep interiors
Perfect for restoring an aging Jeep or replacing worn-out interior flooring, this light gray carpet kit delivers both style and utility, keeping your rig looking sharp inside and out.
Vehicle Compatibility:
✔ 1976–1983 Jeep CJ-5
✔ 1976–1986 Jeep CJ-7
✔ 1981–1986 Jeep CJ-8 Scrambler
✔ 1987–1995 Jeep Wrangler YJ
Installation Instructions – Please Read Before Installing:
For best results, use a high-quality spray adhesive(NOT INCLUDED) (sold at most hardware or fabric supply stores).
Step-by-Step Installation Guide:
Step 1: Prep the Interior
Remove the front and rear seats, seat belts, and shifter boots (if applicable).
Vacuum and clean the entire floor thoroughly. Ensure all surfaces are completely dry before continuing.
This ensures proper adhesion and prevents moisture from being trapped under the carpet.
Step 2: Test Fit the Carpet
Lay out all 6 carpet pieces to confirm all parts are included.
Dry fit each piece in its intended position.
NOTE: Carpet pieces do not come with pre-cut holes for mounting points.
Step 3: Install Fender Well Covers
Begin with the left and right rear fender well covers.
Hold each piece in place and mark where the roll bar contacts the carpet.
Carefully cut only what is needed around the roll bar base for a flush fit.
Spray adhesive on the back of the carpet, then press into place and smooth out.
Repeat for the opposite side.
Step 4: Install Rear Floor Section
Position the rear floor carpet and mark hole locations for seat belt and rear seat mounts.
Only cut small openings to expose necessary bolt holes.
Spray adhesive on the back and install the section into place.
Step 5: Install Center Section
Lay the center piece over the floor tunnel area.
Again, mark and cut small holes for seat mounts and belts if applicable.
Apply adhesive, then slide and press the carpet into place.
Step 6: Install Front Section
Position the front carpet piece.
Mark and carefully cut around the shifter(s), seat bolts, and pedal brackets as needed.
Be sure the carpet does not interfere with pedal operation – trim if necessary.
Spray adhesive, apply the carpet, and press it down firmly.
Final Step: Reassembly
Allow the adhesive to cure as per the manufacturer’s instructions.
Reinstall all removed components, including seats, belts, and shift boots.
Welcome to Dave’s Auto Accessories – a family-owned business with over 10 years of experience in the aftermarket auto parts industry. This item is in stock and ships same or next business day.
🔧 Important Notice:
- No installation instructions included.
- Professional installation is strongly recommended.
- Some items may require minor trimming or modification for proper fit.
⚠️ Product Disclaimer:
- Aftermarket replacement part – not made by or affiliated with the original vehicle manufacturer.
- Use of aftermarket parts may affect your vehicle’s warranty.
- We are not responsible for incorrect installation, misuse, or damage caused by this product.
💳 Payment:
We accept PayPal, Apple Pay, Google Pay, Visa, Mastercard, and Discover.
🚚 Shipping Details:
- Ships via USPS, UPS, or FedEx Ground (2–5 business days).
- Large items ship via LTL Freight (5–14 business days).
- Continental U.S. 48 states only. Extra charges apply outside this area.
- International shipping available — message us for a quote.
🔁 Returns & Exchanges:
- 30-day return policy on most items (unless noted otherwise).
- Must be returned unused and in original packaging.
- Contact us before returning so we can help you through the process.
- Refunds processed within 2–3 business days after item is received and inspected.
📞 Contact Us:
We are located in Los Angeles, California
Business Hours: Monday – Friday | 9:00 AM – 5:00 PM PST
Message us anytime — we’re happy to help!
🛑 RELEASE OF LIABILITY – PLEASE READ CAREFULLY
By purchasing or using this product, you agree to the following:
This item is sold "as is" without warranties, express or implied, including merchantability or fitness for a particular purpose. It is an aftermarket/replacement part, not made by or affiliated with the original vehicle manufacturer. Use of aftermarket parts may affect your factory warranty. Buyer is responsible for compatibility, installation, and safe use.
Dave’s Auto Accessories is not liable for damages, injuries, or losses from the use, misuse, or installation of this product. Installation should be done by a qualified professional. Improper installation may cause serious injury or damage.
Buyer assumes full responsibility for purchase, installation, and use. Buyer agrees to indemnify and hold harmless Dave’s Auto Accessories and its staff from any claims or costs arising from the product. This release is binding upon the buyer and their heirs, executors, and assigns. Any legal disputes will be handled exclusively in Los Angeles County, California.
If you do not agree, do not purchase. Purchase indicates full acceptance of these terms.