Zebra HC100 Thermal Network Wristband Printer with PSU , USB Cable and with or without Zebra original adult size 25.4mm x 279.4mm cartridge  in White.

Good used working condition.

Download and install ZDesigner driver from Zebra website before connecting printer.

After printer is installed and connected go to Control Panel- Devices and Printers , right click on Printing preferences, Advanced Setup- Tracking Mode set to Mark Sensing.

When setting label in ZebraDesigner software choose Orientation - Landscape, in Label Dimensions window set label Width which is not total width but PRINTABLE width. Sum of Label Margins and Printable Width should amount 279.4mm. (Numbers for supplied cartridge wristband dimensions). Example: Printable width 200.4mm, empty margin from Left 35mm, empty Margin from right 44mm, then 200.4+35+44=279.4 .

Label size is taken from cartridge chip and calibration not required.

To install as a network printer go to Control panel- Add printer-Network printer- Choose Printer isn't on a list- type in IP address from the label on side of printer (see my note below)- Device type-Print Server-Choose model of your printer. Install, configure- Add label size, calibrate and you are ready to go.

Note: I changed my Broadband provider to Virgin Media and now my LAN IP pool is different from most popular so I stopped setting Permanent IP address and putting sticker with it on a side of a printer .s and putting sticker with it on a side of a printer because it will be not compatible with most popular LAN pool 192.168.1.1-254. 

If you need express delivery- please choose this delivery option from drop down menu when paying for the item.

 Any other problems- please contact me. My details in Business Details at the bottom of listing.