Features:
- Pressure tested to prevent leaks
- All calipers are thoroughly inspected for quality and safety
- High temperature rubber for extended life
- Premium silicone lubrication provides smoother operation
- The very same manufacturing process the original equipment manufacturers use
- Safe in Quality,Outstanding Performance
- Comfortable and Quiet Green and Dustless
- Innovative Technology Trusted Product
Application For:
for 2011-2018 Volvo S60 (with Solid Rotors,without Parking Brake Motor)
for 2016-2018 Volvo S60 Cross Country
for 2011-2016 Volvo S80 (with Solid Rotors,without Parking Brake Motor)
for 2015-2018 Volvo V60 (with Solid Rotors,without Parking Brake Motor)
for 2015-2018 Volvo V60 Cross Country (with Solid Rotors,without Parking Brake Motor)
for 2010-2017 Volvo XC60 (with Solid Rotors,without Parking Brake Motor)
for 2013-2016 Volvo XC70 (with Solid Rotors,without Parking Brake Motor)
NOTE: To Confirm that this part fits your Vehicle, enter your vehicle's Year, Make, Model, Trim and Engine in the Compatibility Table. Also review the Notes section in the compatibility chart for additional specifications about this part.
QTY: 1pcs Brake Calipers
How to Install Brake Calipers - Remove an Old Brake Caliper:
1. Raise your vehicle with a jack and remove the wheel in front of the caliper.
2. Remove the caliper bolts and pry the caliper off with a screwdriver.
3. Pull the brake pads from the caliper bracket, then remove the bracket.
4. Disconnect the caliper from the brake hose by turning the banjo bolt.
5. Secure the new caliper to the brake hose and screw the bracket into place.
6. Slide the brake pads back onto the caliper bracket.
7. Attach and secure the new caliper to the bracket with the bolts and a ratchet.
How to Install Brake Calipers - Install New Brake Caliper:
1. Get a new brake caliper that’s compatible with your vehicle
2. Unscrew the banjo bolt on the caliper that connects to the brake hose
3. Secure the hose onto the intake port on the new caliper.
4. Screw the caliper bracket against the brake rotor
5. Slide the brake pads onto the front and back of the caliper bracket
6. Attach the new caliper to the bracket so it fits around the brake pads
How to Install Brake Calipers - Bleeding the Brake System:
1. Loosen the cap on the main brake cylinder under your vehicle’s hood
2. Connect a clear plastic hose between the bleeder valve and a bottle
3. Open the bleeder valve on the caliper until it starts leaking brake fluid
4. Ask a helper to pump the brake pedal until you don’t see bubbles in the hose
5. Reattach the wheel to your vehicle
6. Take your vehicle for a test drive to make sure the brakes work properly
The Brake Caliper is backed with 1 year warranty.