电脑 welcome.png
Battery Balancer Series 2x12V Voltage Equalizer for Enhanced Performance
DESCRIPTION

Features:

The battery equalizer is used for 12V lead-acid batteries in series to keep the battery voltage deeply balanced. When two or more batteries in series are in charge/discharge/idle state, the battery voltage may be different. battery voltage is high and the other battery voltage is low.

When the battery equalizer detects that the voltage of two batteries differs by 10mV, it will equalize/balance the battery voltage. It will shunt the current from battery (the battery with higher voltage) to the other battery (the battery with lower voltage) until their voltages are almost the same. 

This will improve the performance of the battery and extend the service life of the battery. 

The product adopts an aluminum alloy shell design, which is more conducive to the heat dissipation of components. The equipped plug-in terminal and 1m extension cable are more convenient for users to install. The FBA052S battery equalizer is usually used for two 12V batteries in series. 

It can be used for lithium titanate batteries, lithium-ion batteries, lithium iron phosphate batteries, lead-acid batteries, .


Specifications:

Part name: Battery balancer

Material: Aluminum alloy

Color: Black

Model: FBA052S/KBA052S

KBA052S with display

Battery nominal voltage: 2×12V

Optimized current: 0-5A

Quiet current: <3mA

size: 75×72×22mm

Protection: Reverse protection

Low voltage disconnection: 10V

Casing material: Aluminum alloy

Extension cable: 100cm

Battery terminal: M8

Please read the instructions before installing the device!

Before connecting the balancer, please confirm the positive and negative poles of the battery pack to avoid short circuit and reverse connection between the battery balancer terminals.

①Connect the M8 terminal of the red wire to the positive pole of the 24V battery pack.

②Connect the M8 terminal of the black wire to the negative pole of the 24V battery pack.

③Connect the M8 terminal of the white wire to the series common terminal of the 24V battery pack.

④After checking that the wiring is correct, connect the quick connector to the battery balancer.


Package content:

1*Battery balancer


Note:

1: Please allow 1-2 cm error due to manual measurement, please make sure you do not mind before ordering.

2: Due to the difference between different monitors, the image may not reflect the actual color of the item





POLICES

 

We only ship to confirmed ebay Order addresses. Please comfirm that your Order address is in line with your shipping address.

 

Please kindly note that the combined shipping is not provided because the shipping fee is calculated by weight. Also, the each additional item means exactly the the same color and size. 

 

It takes about 7-15 working days to US; about 10-30 working days to other countries. Transit time may be a little delayed because of the bad weather and customs inspection. If you do not receive your item within 30 working days since payment finished, please contact us immediately for further assistance.

 


Payment must be completed within 5 days. If you have any problems about payment, please contact us via ebay message.

 

We strive for 100% customer satisfaction! Positive Feedback is very important to us. If you have any questions, please feel free to contact us via "Ask seller a question" . We will reply your email within 24 working hours.