YUSHI UM-1 Portable Ultrasonic Thickness Gauge Pipe Wall Corrosion Tester Meter
Main Features
Accurate measurement: each instrument is measured by 35 test blocks before leaving the factory;
Stable reading without flickering;
Fast value output: the measured value is output as soon as the probe is put on;
High resolution: even a 0.1 inch difference can be distinguished;
LCD screen display, low power consumption: the output current is 13-15 mA, working time is up to 200 hours.
Stable reading without flickering;
Fast value output: the measured value is output as soon as the probe is put on;
High resolution: even a 0.1 inch difference can be distinguished;
LCD screen display, low power consumption: the output current is 13-15 mA, working time is up to 200 hours.
Technical Specification of UM-1
| Display Type | 128×64 dot-matrix LCD screen with EL backlight |
| Operating Principle | P-E (pulse-echo) with dual-crystal probes |
Measuring Range In Standard Mode | 0.8mm to 300mm, depending on material and probe |
Measuring Limits of Tube (Steel) | Φ20mm×3.0mm(PT-08 probe) Φ15mm×2.0mm(PT-06 probe) The measuring error is up to ±0.1mm |
| Measuring Error | Low limit to 10mm: ±0.1mm 10mm to high limit: ± (1%H+0.1) mm Note: H is the actual thickness of the measured object |
Minimum Value Checking | Move the probe along the surface of the testing piece, the gauge is able to find the thinnest point automatically. |
| Warning Function | If the measured value exceeds the pre-set limit, the warning tone will be start. |
| Communication Port | USB port or Serial RS 232 port (Optional) |
| Application Software | UmView Software for transmission,storage,analysis and documents editing (Optional) |
| Operating Time | Up to 200 hours with alkaline batteries (without backlight) |
| Instrument Shut-off | AUTO OFF after 5 minutes of inactivity |
Operating Temperature | -10°C to +50°C , -20°C in special requirements |
Warranty | A year |
Quality Certificate | CE |
Other Instruments
