• Specifications:
    • 100% Brand New
    • Color: Sliver
    • Material: high strength polished Aircraft Quality Aluminum
    • Single Adjusting Jack Plate
    • Bronze and Brass hardware eliminate binding
    • Adjusts easily by turning one steel bolt
    • Offers 4 inches of adjustable Vertical movement
    • 4 inches of setback
    • Weighs 24 lbs
    • 225 Maximum Horsepower
    • OE FACTORY STYLE & QUALITY, BUT COST-EFFECTIVE
     
  •  
  •  Pre-drilled holes for 1/2'' stainless hardware.
  •  
  • Jack Plate Manual Jack Plate Adjustable 4" Outboard Motor Jack Plate for Boat

    Specifications:

    • 100% Brand New
    • Color: Sliver
    • Material: high strength polished Aircraft Quality Aluminum
    • Single Adjusting Jack Plate
    • Bronze and Brass hardware eliminate binding
    • Adjusts easily by turning one steel bolt
    • Offers 4 inches of adjustable Vertical movement
    • 4 inches of setback
    • Weighs 24 lbs
    • 225 Maximum Horsepower
    • OE FACTORY STYLE & QUALITY, BUT COST-EFFECTIVE

     

     


    Pre-drilled holes for 1/2'' stainless hardware.

     

    12 7/8'' across the top two holes from center to center.

    9 7/8'' across the bottom two holes from center to center.

    8'' of vertical distance between the top holes and bottom mounting holes.

     

     

     

    Compatibility

    Fits LOWER bolt pattern of outboard, 10 IN bolt hole pattern
    Fits for all outboard motors newer than 1986 that do not have twist clamps
    Note: NOT fits for 2000 Suzuki DT25C and Yamaha F350

     

     

    Description:

    A jack plate will compensate for a long shaft engine!

     

    How can you tell if your boat would benefit from a jack plate?

    • Poor Holeshot
    • Your outboard's not perpendicular (straight up & down) in relation to the water at top speed.
    • If you can trim the engine all the way up without the prop letting go or with no appreciable loss of water pressure at full throttle.
    • The hull doesn't seem to “lift” like it should.
    • Boats rigged with jack plates, but otherwise identical to yours, turn higher-pitch props and perform better

    These characteristics can also be indications of other, more serious problems, but if you’re experiencing any or all of the above, your boat could be a good candidate for a jack plate implant.

     

     

    Feature:

    Lightweight design weighs only 24 pounds and is easy to handle and install.
    Adjustable vertical motion The adjustable Jack top plate offers 4 inches of adjustable vertical motion, allowing you to fine-tune the height of the motor for optimal performance and fuel efficiency. Adjusting the height is as easy as turning a steel bolt.
    Easy to install outboard engine jack plates are designed for quick and easy installation with a sliding sleeve design that allows easy replacement of damaged or rusted jack plates.
    The durable top plate is made of high quality aluminum for maximum corrosion resistance and durability.

     

     

    Package Include:

    1pc 4'' Outboard Boat Aluminum Motor Jack Plate Tool

     

     

    Our Certificates:

     

     

    Our Factory:


    Item Specifics
    Brand CarBole
    Type Jack Plate
    Bundle Description 4'' Outboard Boat Aluminum Motor Jack Plate Tool
    Manufacturer Part Number DAC734
    Custom Bundle No
    Modified Item No
    Non-Domestic Product Yes
    Component Type Outboard Motor Jack Plate
    Interchange Part Number For JPL4400 Boat
    Material Aluminum
    Minimum Height 4 inches
    Size 4 Inches
    Weighs 24 lbs
    Color Sliver
    Maximum Horsepower 225
    Model Universal
    Feature Adjusts easily by turning one steel bolt
    Warranty Lifetime

    Payment

    Additional shipping fee may be charged for buyers from Puerto Rico, Hawaii, Alaska, Guam, and the U.S. military address of the United States or other remote area (zone 8-10).

    Our items typically ship via USPS or UPS. Same day shipping (typically until 3pm CST, which varies depending on carrier arrival time). Next day, overnight, and 1 day shipping options will be same day shipped until 4pm CST.

    We ship all items to United States only. International shipping is provided by Ebay global shipping program and is calculated once the items are placed in the shopping cart.

    ICT Billet LLC is not responsible for missing or lost packages once they are picked up by the carrier.

    Shipping

    PayPal: We accept payments through PayPal,Credit card, Debit card, Apple Pay, Google Pay,PayPal ,visa,or master card when purchasing our products through eBay.

    eCheck Issues: Many people do not realize when paying via eCheck that those payments do not clear immediately. You will have to wait up to 7 business days after completing checkout for the payment to clear. We are unable to ship your order until payment has cleared.

    Auction Payments: We understand that you cannot always be available to pay immediately at the close of the auction. We give 4 days to complete payment or the item will be relisted.

     

    Returns

    It is the customers responsibility to get the item postmarked to us within the 60 day return period in NEW, UNUSED condition. If you decide to return your item for any reason please send the items back to the below address along with your receipt or packing slip. Package all items carefully so that they are not damaged during shipping. Items returned past 60 days or damaged will not be refunded. These items will be returned at the buyers expense. Refunds will be processed quickly when package arrival.

    Contact us immediately! Take photos and note damages. The more details you can provide, the quicker we can assist you.

    Contact

    If you have any questions, please feel free to consult via email. We will handle it for you as soon as possible.

    Feedback

    We maintain high standards of excellence (five stars review)and strive for 100% customer satisfaction!    FEEDBACK IS VERY   IMPORTANT TO US. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that  we can satisfactorily address your concerns.
    It is impossible to address issues if we do not know about them!

    Help & Info
    Payment Policy
    Shipping Policy
    Return Policy
    FAQ
    About Us
    Excellent Delivery
    Jack Plate Manual Jack Plate Adjustable 4" Outboard Motor Jack Plate for Boat

    Specifications:

    • 100% Brand New
    • Color: Sliver
    • Material: high strength polished Aircraft Quality Aluminum
    • Single Adjusting Jack Plate
    • Bronze and Brass hardware eliminate binding
    • Adjusts easily by turning one steel bolt
    • Offers 4 inches of adjustable Vertical movement
    • 4 inches of setback
    • Weighs 24 lbs
    • 225 Maximum Horsepower
    • OE FACTORY STYLE & QUALITY, BUT COST-EFFECTIVE

     

     


    Pre-drilled holes for 1/2'' stainless hardware.

     

    12 7/8'' across the top two holes from center to center.

    9 7/8'' across the bottom two holes from center to center.

    8'' of vertical distance between the top holes and bottom mounting holes.

     

     

     

    Compatibility

    Fits LOWER bolt pattern of outboard, 10 IN bolt hole pattern
    Fits for all outboard motors newer than 1986 that do not have twist clamps
    Note: NOT fits for 2000 Suzuki DT25C and Yamaha F350

     

     

    Description:

    A jack plate will compensate for a long shaft engine!

     

    How can you tell if your boat would benefit from a jack plate?

    • Poor Holeshot
    • Your outboard's not perpendicular (straight up & down) in relation to the water at top speed.
    • If you can trim the engine all the way up without the prop letting go or with no appreciable loss of water pressure at full throttle.
    • The hull doesn't seem to “lift” like it should.
    • Boats rigged with jack plates, but otherwise identical to yours, turn higher-pitch props and perform better

    These characteristics can also be indications of other, more serious problems, but if you’re experiencing any or all of the above, your boat could be a good candidate for a jack plate implant.

     

     

    Feature:

    Lightweight design weighs only 24 pounds and is easy to handle and install.
    Adjustable vertical motion The adjustable Jack top plate offers 4 inches of adjustable vertical motion, allowing you to fine-tune the height of the motor for optimal performance and fuel efficiency. Adjusting the height is as easy as turning a steel bolt.
    Easy to install outboard engine jack plates are designed for quick and easy installation with a sliding sleeve design that allows easy replacement of damaged or rusted jack plates.
    The durable top plate is made of high quality aluminum for maximum corrosion resistance and durability.

     

     

    Package Include:

    1pc 4'' Outboard Boat Aluminum Motor Jack Plate Tool

     

     

    Our Certificates:

     

     

    Our Factory:



    Additional shipping fee may be charged for buyers from Puerto Rico, Hawaii, Alaska, Guam, and the U.S. military address of the United States or other remote area (zone 8-10).

    Our items typically ship via USPS or UPS. Same day shipping (typically until 3pm CST, which varies depending on carrier arrival time). Next day, overnight, and 1 day shipping options will be same day shipped until 4pm CST.

    We ship all items to United States only. International shipping is provided by Ebay global shipping program and is calculated once the items are placed in the shopping cart.

    ICT Billet LLC is not responsible for missing or lost packages once they are picked up by the carrier.

    PayPal: We accept payments through PayPal,Credit card, Debit card, Apple Pay, Google Pay,PayPal ,visa,or master card when purchasing our products through eBay.

    eCheck Issues: Many people do not realize when paying via eCheck that those payments do not clear immediately. You will have to wait up to 7 business days after completing checkout for the payment to clear. We are unable to ship your order until payment has cleared.

    Auction Payments: We understand that you cannot always be available to pay immediately at the close of the auction. We give 4 days to complete payment or the item will be relisted.

     

    It is the customers responsibility to get the item postmarked to us within the 60 day return period in NEW, UNUSED condition. If you decide to return your item for any reason please send the items back to the below address along with your receipt or packing slip. Package all items carefully so that they are not damaged during shipping. Items returned past 60 days or damaged will not be refunded. These items will be returned at the buyers expense. Refunds will be processed quickly when package arrival.

    Contact us immediately! Take photos and note damages. The more details you can provide, the quicker we can assist you.

    If you have any questions, please feel free to consult via email. We will handle it for you as soon as possible.

    We maintain high standards of excellence (five stars review)and strive for 100% customer satisfaction!    FEEDBACK IS VERY   IMPORTANT TO US. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that  we can satisfactorily address your concerns.
    It is impossible to address issues if we do not know about them!


    All rights reserved.


    DataCaciques