
Poolpure focuses on bringing great technologies and products to the market that truly provide clean water filtration possible for the health, safety and happiness of every pool and spa owner.
Certificate WP-12238, by IAMPO, 2019

If you already know your filter cartridge's part number or the replacement number, you can use the search the part number on our product page to quickly confirm whether the filter is compatible.
If you do not know the replacement part number for your cartridge, then choosing the right cartridge can be accomplished by measuring your existing one. Use the following steps as a guide:
1. Measure the outside diameter of the cartridge in inches (+/- 1/16).
2. Measure cartridge length from end cap to end cap (+/- 1/16). Exclude any handles or extensions.
3. Identify the correct top and bottom type. If the top and/or bottom is open, measure the inside diameter of the opening (+/- 1/16th inch). If the end cap is closed make note of its identifying features (i.e. “Handle”, “Cone”, etc.).
4. Make note of the manufacturer and model number of the filter into which the replacement cartridge will be installed.
5. Take note whether or not there is a center core (PVC pipe in center).

Specifications of PLFPWK35B:
Replacement Part Numbers:
Watkins 1642301-1 | 78161 | 78286 | Pleatco PWK35B | Filbur FC-3921| Darlly 60512
This filter used in pools / spas made by:
Watkins Mfg. and hot spring kimelight series: pulse, flair, flash & beam
Note: All manufacturers' names and part numbers remain the property of their respective holder(s) and are used for compatibility information only.

Poolpure only uses Lead-free and BPA free materials. Assure you of safe and no-worry happy times.

Reinforced end caps are break resistant and are highly resistant to chemicals commonly found in pool and spa applications.

The Poolpure filter can be used repeatedly after proper cleaning and maintenance, which increases the service life of the pool filter and saves money.

