Features:

and
Made of - materials,
33cm / 1.08ft 1.6mm solid solution welding flux cored electrode aluminum wire brazing
Aluminum welding rod is pure aluminum welding wire with aluminum content greater than 99.7%. It is a welding material with a wide range of uses.
Excellent welding effect-due to the internal powder, it has a sufficient and smooth welding effect. Low melting point (550°~600°), strong weldability and resistance, high thermal conductivity, high electrical conductivity, and excellent processing performance.
No solder powder-you don't need to use other flux powders that use aluminum alloy as the flux, but use the salt base as the coating. Very convenient and easy to solder.
Wide service life-suitable for welding or surfacing welding of alloys with high strength, good forgeability and resistance.
It has a wide range of uses-mainly used for argon welding and filling materials of pure aluminum, and connection with aluminum bus bars and guide rods in electrolytic aluminum plants, as well as electricity, chemicals, food, .
Light weight and small size-size is 330*1.6mm, weight is 3.5g, very easy to bend and carry.


Product parameters:

Quantity: 50PCS
Material: Aluminum
Color: silver
Melting point: 550°~600°
Diameter: 1.6 mm
Length: 33cm / 1.08ft
Recommended for welding or brazing aluminum alloys: 1060, 1350, 3003, 3004, 3005, 5005, 5050, 6053, 6061, 6951, 7005 and cast alloys 710.0 and 711.0
Item weight: about 3.5g / 0.12in (a piece of aluminum welding wire)

how to use:
Step 1: Clean and polish the physical .
Step 2: Heat the of the substrate until the temperature of the welding wire reaches the working temperature of 380degree Celsius~400degree Celsius, so the heat transfer wire of the parent metal can be used to form the welding seam, and the flame should not be used when the temperature of the base metal is high enough. Flows well and penetrates into the metal capillary.
Step 3: When repairing thin aluminum, just heat the aluminum-based metal to a suitable working temperature, and then use the steel wire to frictionally melt back and forth to form a weld.Only the wire melted with a metal brush can be welded at the weld.
Step 4: Use propane gas to weld the object, use industrial gas or induction heating device to heat and weld the large object, and slowly cool down after welding.

Applications in life:
It can be used for a variety of heat sources, such as propane, oxyacetylene, .
Low temperature aluminum welding wire can weld almost all white metals, including aluminum, aluminum, cast aluminum, aluminum alloy and dissimilar welding between the above metals.
Even white metal that is heavily corroded or oily, or even aluminum alloy that cannot be repaired can be repaired.
It is suitable for all-round welding of primary welding operators, only a small heating device is needed, and the welding strength after welding is generally higher than the strength of the base metal itself, and the gas welding can be understood.

note:
The base metal must be clean.
The temperature of the base material should reach 400 degrees, including the temperature of the base material should be maintained at 400 degrees Celsius during the welding process, and the temperature can be high or low.


packing list:

50 * Aluminum welding wire

Note:

1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

2. Please allow slight manual measurement deviation for the data.

Payment must be completed within 5 days. If you have any problems about payment, please contact us via ebay message.

We only ship to confirmed ebay Order addresses. Please comfirm that your Order address is in line with your shipping address.

Please kindly note that the combined shipping is not provided because the shipping fee is calculated by weight. Also, the each additional item means exactly the the same color and size. 

It takes about 7-15 working days to US; about 10-30 working days to other countries. Transit time may be a little delayed because of the bad weather and customs inspection. If you do not receive your item within 30 working days since payment finished, please contact us immediately for further assistance.

We strive for 100% customer satisfaction! Positive Feedback is very important to us. If you have any questions, please feel free to contact us via "Ask seller a question" . We will reply your email within 24 working hours.