Item Description and Usability:

· Premium Quality Brand New Kit

· Dual Bypass Remote 7.3 Ford Powerstroke Diesel Engine & 6.9 Absolute Oil Filter Kit

· Adds 2 quart of oil to your system.

· Full-Flow filter system filters out virtually all of the engine wearing particulate

· Greatly Extends the Life of Your Engine, Increases power & fuel economy with better ring sealing and less friction when used with CASTROL EDGE or Shell Rotella T Synthetic Motor Oil! Removes soot from engine oil. Allows extended oil drain intervals with oil testing. 

· Made in the USA!

Filters Are INCLUDED, 9' of SAE J30R7 Upgrade 5/8" ID Hose 300 PSI Working Pressure (1,200 PSI Burst Pressure) Incuded!!! Cut with  PVC Pipe Cutter.

Includes:

· 4-port dual remote with ½” NPT ports. Allows in/out RR, LL and inline RL, LR mounting.

· 1 1/2”-16 Spin-on adapter with ½” NPT ports replaces Motorcraft FL-1995 OEM Filter

· Four 5/8” HB x ½” NPT solid brass fittings

· Two ½” NPT hex plugs

· CNC Billet Steel Zinc Plated 1”-16 X ¾”-16 nipple & 1"-14 x 1” nipple Aligned and Mounted with Red Loctite 271

· One 4 1/4” O-ring

· Simple and easy 1 page installation instructions

Ships with filters!!!!!!!!!  + Hose!!!! Uses the filters shown in picture. Baldwin 8u Absolute Upgrade Filter B7379 & Baldwin 4u Absolute BF7633. 

Use Pipe Joint Compound when installing ALL FITTINGS and PLUGS. Torque to 15 ft/lbs.

Please note the Baldwin BF7587 & BF7633 Filters that are used on this mount are Normally used as Diesel Fuel Filters; these work perfect in this reduced flow application for engine oil. Removes about half of the soot in the engine oil in addition to all of the abrasive wear particulate down to about 0.5 micron. Control of solid contamination in diesel and gasoline crankcase oils has a well-documented effect on engine reliability. Micron Size and Capture Efficiency - where the rubber meets the road. 

Read more here https://www.machinerylubrication.com/Read/30697/choose-oil-filter

Watch our video how to install the kit here https://www.youtube.com/watch?v=x5vHk98S8Oc 

Attention! FOLLOW THE GENERAL INSTALLATION INSTRUCTIONS. MAKE SURE THAT THE OUT PORT (NEAR EDGE) OF THE SPIN-ON ADAPTER IS CONNECTED TO THE PORT HAVING "IN" ARROW 

Note: CNC Machined Billet Steel Nipples are Depth Set for Maximum Performance and Set With Loctite! Do NOT attempt to remove the Nipples!!!!!! You will ruin the Part!!! If you do not like the way the item looks, do not ruin it, just return for a full refund!!!