eBay

Why purchase a recycled keyless entry remote transmitter?

The vehicle keyless remote key fob you are going to purchase from us is pre-owned; aka: used, previously loved ;). We recycle OEM and aftermarket keyfobs and put them through a concise refurbishing process so we can guarantee our products are delivered to you in a ready-to-program state. We offer these car clickers at a significant cost savings to stealerships so you can keep your hard earned cash for something more fun while lightening your ecological footprint J. We call that a win-win! Why wait? Add some convenience to your daily routine and help save the environment, order your recycled car remote control today!

Installed RKE System Type: Please be sure you have an AFTERMARKET (RKE) remote keyless entry system. If your current remote looks the same then this will work. Other options include: Dealer Installed or Factory. The system installed in your vehicle will CHANGE the required remote. If you are unsure send us a message with your current remotes FCC ID and Part # and LED Light color. If you no longer have your remote then send us a message with your system brand, and system id #.

What are you purchasing ? This is ONE (1) replacement keyless entry remote control that will work with your AFTERMARKET installed RKE system.

Compatibility: Works with vehicles that use a compatible aftermarket RKE (remote keyless entry) system installed. See our compatible system list below or match your current remote FCC ID and / or part # or circuit board # and LED Light color (if applicable)to the numbers listed below.

Compatible FCC ID#(s):	Q6WBT4123
Alternate Spellings	Q6W-BT4123, Q6W BT4123, Q6WBT4123, Q6WBT4I23, O6WBT4123, 06WBT4123
Part #(s)	RSTX4-G3
Dealer #(s)
Button Count:	4 buttons: Lock, Unlock, Key, VEH
Battery (installed):	3; CR2016
Frequency:	434 MHz ( MHz)
LED Light Color:	Green/ Red
Circuit board #s:
#s on Chip on board:
Condition Notes:	Pre-Owned ready to program to your compatible vehicle RKE system.
Compatible Aftermarket Installed Systems:	CS-2011DP CS-409TX CS-34TX CS-34TX II CS-34TX II CF RSTX-4 EZ-34DP EZ-90 RS-900 II RS-900 III RS-900 IV RS-900 V RS-900 VI RS-900 VII RS-1303DP RS-1304DP RS-1405DP RS-1505DP RS4-G3
Programming: Please note not all customers will be able to complete the programming on their own so if you are having trouble or unsure diagnostic programming is available at your local qualified automotive locksmith or car/audio shop.	A - To program your remote you will need to turn the ignition to the ON position, generally this is the second position or just before the vehicle cranks the starter. B - Next we will need to locate the programming/valet button. There is no single location for this button as it is up to the installation facility and installer on where it will be mounted. C - On this vehicle, the switch was mounted behind the side panel of the left side of the dash. D - Once you have located the valet button; press the button 4 times with a short pause in-between each one (approximately once every second). After the fourth press - if done correctly - the parking lights will flash 4 times letting you know you are in programming mode. a) If you are programming a remote with keyless entry - like we are here - press the LOCK button to pair the remote b) If you are programming a single button remote, press the START button. E - The parking lights will flash for each remote that you program. Once for the first, twice for the second and so on up to 4 remotes. NOTE: When you enter remote programming mode, it will remove all previous remote codes from the system. We recommend that you have all remotes for the system physically with you at the time of programming. F - After all of the remotes have been programmed, simply turn the ignition OFF to exit programming. (2) How to get in and out of multi-vehicle mode: A - To switch from Vehicle #1 to Vehicle #2, press and hold the VEH button on the remote until the LED changes from BLUE to RED. This should take approximately 5 seconds. B - To switch from Vehicle #2 to Vehicle #1, press and hold the VEH button on the remote until the LED changes from RED to BLUE. This should take approximately 5 seconds.

Why does your vehicles installed RKE / Security system determine which remote control your can purchase?

The remotes job is to pair with your vehicles installed RKE system. It will only sync to a matching system; therefore, you cannot purchase a different type of remote than the remote manufactured with the system. It will not pair with a foreign system.

Programming:

We will send you information on how to locate programming requirement/instructions for your make, model, and year vehicle. Some vehicles have DIY (do-it-yourself) programming instructions available. While other vehicles require diagnostic programming which is available at your local qualified automotive locksmith or dealer.

Programming Requirement Information NOTE:

The vehicle manufacturers determine the programming requirements at the time of manufacture. We pass the programming requirements / instructions on to you as a courtesy. We do not write the programming nor do we determine which vehicles require diagnostic programming and which vehicles can be programmed by the you (DIY). We are not locksmiths nor mechanics nor are we familiar with EVERY vehicles program sequence. If you have questions:

1. Check your Vehicle Owners Manual for OEM Factory remotes or The User Manual for Dealer Installed or Aftermarket RKE systems.

2. YouTube has many video postings from do-it-yourselfers to assist with all kinds of questions & most customers find if very helpful to WATCH the programming being done which can eliminate mistakes in the sequence.

To locate the programming for your vehicle via this method go to YouTube and once there in the search bar type in the following:

i. If you have a factory RKE system: your make model year + the words program remote (i.e.: 2005 Ford Mustang program remote)

ii. If you have a dealer installed or aftermarket RKE system: the FCC ID or system type + the words program remote (i.e.: ELVAT5C program remote or AS200 program transmitter?)

3. For OEM FACTORY installed systems: send us an eBay message with your vehicles make, model & year = we can pass on to you any programming information requirements we have on hand.

4. For DEALER INSTALLED RKE installed systems: send us an eBay message with your remote controls FCC ID # and PART# and the vehicles make, model, & year = we can pass on to you any programming information requirements we have on hand (the programming for dealer installed RKE systems will be different than Factory or Aftermarket installed RKE systems).

5. For AFTERMARKET INSTALLED RKE installed systems: send us an eBay message with your remote controls FCC ID # and PART# = we can pass on to you any programming information requirements we have on hand (the programming for aftermarket installed RKE systems will be different than Factory or Dealer installed RKE systems).

6. There are also many auto forums that you can go onto by just conducting a google search with your questions.

7. or a local automotive locksmith or your local parts/car/audio store will typically be able to assist you if you are trying to avoid the dealer.